Loading ...
Loading ...
Loading ...
4
STEP 1 (Continued)
Install the swivel arm (D) to the pole (A). Fasten the bolt with the supplied Allen wrench (O). Attach the
wire clip (N-1, N-2) to the pole (A) and swivel arm (D).
STEP 2
Option B: Grommet Base with Existing Hole
If existing grommet hole comes with a plastic
protector, remove it to ensure a flat surface
before installing the desk mount.
1. Install grommet base plate (M) to the pole
(A) using x3 M5x14 bolts (F). See Figure 4.
2. Attach so pad (T2) to the grommet base
plate (M) , see Figure 5.
3. Position pole (A) on the mounting surface
and secure using the support plate (J),
M10 washer (K), spring washer (L) and M10
bolt (I). Fasten M10 bolt using provided
wrench (P). See Figure 6.
a
m
f
Figure 4
t2
Figure 5
j
i
k
l
Figure 6
Option C: Grommet Base with Self-Drilled Hole
1. Position the Pole (A) on the mounting surface and mark the center hole. Drill a 3/8” (10mm)
diameter hole at the marked position through the mounting surface.
2. Install the Grommet Base Plate (M) to the Pole (A) using x3 M5x14 Bolts (F), and tighten using the
Allen Wrench (O), see Figure 4.
3. Attach So Pad (T2) to the Grommet Base Plate (M), see Figure 5.
4. Position the Pole (A) on the mounting surface and secure using Support Plate (J), M10 Washer
(K), Spring Washer (L), and M10 Bolt (I). Fasten the M10 Bolt using provided Wrench (P), see
Figure 6.
d
o
n1
n2
Loading ...
Loading ...
Loading ...