Loading ...
Loading ...
3
Operation
Power:
1. Press the POWER key to turn the unit on.
a. The dehumidifier will automatically enter continuous mode, and the CONT icon will glow red on the control panel.
b. The fan speed will automatically be set to high, and the SPEED icon will glow red on the control panel.
2. Press the power key again to turn the unit off. The fan will continue running for 10 seconds before powering off.
NOTE 1: When plugged in, the control panel will glow blue.
NOTE 2: When operating, the control panel icons will glow red.
Humidity settings:
1. Press the HUM SET key to exit continuous mode and enter smart mode.
2. Each press of the key will increase the humidity level by 5% from 40%–80%. When the indoor humidity is lower than the set
humidity, the machine would stop automatically.
3. 5 seconds after the humidity is set, the room’s current humidity will be displayed on the control panel.
4. Press and hold the key for 3 seconds to view the current temperature.
NOTE 1: The default humidity level is 60%.
NOTE 2: If the humidity displays as “– –%”, the system is currently in continuous mode.
Timer:
1. Press the TIMER button to set the 24 hour timer.
2. Each press will add 1 hour to the timer, up to 24 hours.
3. To turn off the timer, press the TIMER button until the displayed time is “– –”
NOTE: When the timer is set, the TIMER icon will glow blue.
Fan Speed:
1. Press the SPEED button to switch the fan between high and low speed.
NOTE 1: When high speed is selected, the SPEED icon will glow red.
NOTE 2: When low speed is selected, the SPEED icon will glow blue.
Ion:
1. Press this button to activate the ion feature.
2. This feature can be used independently of the dehumidifying feature.
NOTE: When the ionizer is on, the ION icon will glow blue.
Status codes
LO: the current humidity is below 20%
HI: the current humidity is above 95%
Loading ...
Loading ...