Loading ...
Loading ...
Loading ...
8 INSTALLATION
INSTALLATION
Pre-installation
Before installing the cooker hood, peel off any protective
coating.
Location
The hood is to be mounted on the wall. When installed,
the hood must be not less than 60cm above electric
burners or 65cm above gas or mixed-fuel burners.
DISTANCE FROM HOOD BASE TO TOP OF HOB
HOB TYPE MINIMUM* MAXIMUM
Gas 650mm 800mm
Electric 600mm 800mm
* If the instructions of the hob specify a greater distance
than the minimum above, then that shall be the minimum
height for installation.
Installation
1. Using a spirit level mark a vertical centre line on
the wall where the hood is to be positioned, and a
horizontal line at the hood base position. (See Fig. 4,
or 5 for relevant model.
NOTE: The height of the underside of the hood body
must be a minimum of 600mm* to a maximum height of
800mm.
*If the instructions of the hob specify a greater distance
than the minimum above, then that shall be the minimum
height for installation.
2. Mark the location for the flue cover wall mounting
brackets and rangehood mounting points and anti-tilt
fixing points above the hood base using the hood
base as a reference point
WARNING
WARNING
Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
232
290
306
364
190
Telescopic flue cover
mounting bracket
Telescopic flue cover
mounting bracket
Lower flue cover
mounting bracket
Lower flue cover
mounting bracket
Range hood
mounting points
Range hood
mounting points
Min 650mm
Max 800mm
Min 650mm
Max 800mm
Min 600mm
Max 800mm
Min 600mm
Max 800mm
Highest point
of hob
Highest point
of hob
Anti tilt fixing point
Anti tilt fixing point
185
33
250
250
235
235
250
130 130
250
WRCG930SB
Gas GasElectric Electric
WRCG940SB
52
Loading ...
Loading ...
Loading ...