Loading ...
Loading ...
Loading ...
E311716
2. Remove the two lower splash shield
push pins and pull the splash shield
back.
E311715
3. Disconnect the bulb electrical
connector.
4. To remove the bulb from the headlamp
assembly, turn it counterclockwise,
then pull it straight out.
5. To install, perform these steps in
reverse order.
Replacing Turn Signal Bulbs
E307885
Turn lampA
Side markerB
E307886
1. Make sure the headlamp control is in
the off position and open the liftgate.
2. Remove the bolt cover using a
standard flat tip screwdriver.
3. Remove the bolt from the lamp
assembly.
4. Gently pull the lamp assembly away
from the vehicle in an outboard
direction.
5. Disconnect the electrical connector.
330
Escape (CTC) Canada/United States of America, Vehicles Built From: 17-06-2019, enUSA, Edition date: 201906, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...