Loading ...
Loading ...
Using the auto shut-off
When the alarm goes off...
If the sensor senses water,
the alarm sounds and the
valves close. The yellow
and red indicators on the
control box start ashing.
You will also receive a
notication on your phone
saying “Device has been
triggered. Automatic shut-off
activated.”
Once you’ve xed the leak and dried off the sensor...
Press and release the Test/Reset
button on the control unit. The
yellow light ashes while the
valves are reopening. The green
light comes on when they have
nished reopening.
Losing power
If you lose power, the control box automatically
closes the shut off valves (more slowly than during
a real alarm), then powers off. You will also get
a notication on your phone saying “Device
Disconnected.” When power returns, if the sensor
does not detect water, the control box will open the
valves again.
Turn the laundry
shut off valves 90
degrees clockwise to
turn the water supply
on for both hoses.
Make sure there are
no leaks. If there are
leaks, tighten the
hose ttings.
Press and release the Test/Reset
button on the control unit.
NOTE: Press the Alarm Off button
immediately after to mute the sound.
The system’s alarm goes off, the
automatic valves close, and the
yellow indicator on control unit
starts ashing.
You will also receive a notication from the RCA
Water Shut-Off App (“TEST” will appear on your
screen).
Once the valves are completely closed, the control
unit will automatically re-open them again in about
30 seconds.
The yellow light ashes while the valves are
reopening. The green light comes on when they
have nished reopening.
The test process takes about 25 seconds to
complete and return to normal (valves open and
green light) status.
If the green light doesn’t come back on, unplug
the controller and plug it back in. Then test the
system again.
RSWL1 QSG 01
Customizing the alarm
By default, the audible alarm keeps sounding until you turn it
off (or until the sensor no longer senses water). You can also
set the audible alarm to sound for 10 seconds only.
To change the audible alarm to 10 seconds only: Press and
hold the Alarm Off button for 2-3 seconds. The yellow LED
ashes to show that you’ve changed the audible alarm to 10
seconds only. To change back, press and hold the Alarm Off
button again.
A. Download and install the App on your phone.
Search for “RCA Water Shut-Off”
in the Apple App or Google Play
Stores. Look for the icon shown
here and install this App on your
phone.
IMPORTANT!!!
• Make sure your phone is on the WiFi network you
want the Smart Water Shut-Off system to use.
• If you have a dual-band router that uses different
networks for the two bands, make sure the WiFi
signal you use is 2.4GHz, not 5GHz!
• Make sure your Smart Module is ready for setup!
The Link and Activity indicators on the Smart
Module are on when the Smart Module is in Setup
mode. The Smart Module goes into Setup Mode
automatically when you rst power it up and
stays in Setup Mode for 6 minutes. If the Link and
Activity indicators on the Smart Module are not
on, unplug the Smart Module and plug it in again.
Shut-off valves
On
Off
To stop the audible alarm: On the control unit, press
the Alarm Off button. (The valves will still be closed.)
Vacation Mode
If you plan to be away from home for an extended
period, put the system in Vacation Mode to shut
the valves while you’re gone. Simply press and hold
the Test/Reset button for three seconds. The yellow
indicator light blinks while the valves are closing and
turns solid yellow with the valves are closed.
When you get back, press and release the Test/Reset
button again to open the valves. The yellow indicator
light blinks while the valves are opening; the green
indicator comes on when the valves are open.
App Notications Guide
If your phone
says...
This means...
“Device has been
triggered. Automatic
shut-off activated.”
Your sensor has detected
water and automatically
shut valves.
“TEST” Your system has gone
through a test and will re-
open valves when nished.
“Device connected” Your system has regained
power and re-opened
valves.
“Device
disconnected”
Your system has lost power
and automatically shut
valves.
“Device has re-
connected to WiFi”
Your smart module lost its
WiFi connection but is now
re-connected.
Set up the App with your system.
10
Turn on the water supply.
11
Test the system.
12
B. Launch the App
The rst time you open the App, you’ll be asked
if you want to allow the RCA Water Shut-Off App
to send you notications. Make sure you choose
Allow in this step so that the App can notify you
when needed!
Make sure your Smart Module is ready for setup!
If the Link and Activity indicators on the Smart
Module are not on, unplug the Smart Module and
plug it in again.
Make sure you’re on the WiFi network you want
to use!
If the Network Name doesn’t match the network you
want to use, quit the App, go to the network settings
for your phone, and connect to the network you
want to use. Then start the App again.
C. Connect the App to your WiFi network
Press the Remember
Password and Show
Password boxes so that
you only have to enter
your password once
(and you can see it
while you’re entering).
Enter the password for
your WiFi network. Then
press OK. IMPORTANT:
Double check your
network name and
password—these must
be correct to work with
the App!
D. Connect the App to your Smart Module
Once you’ve entered the
information for your WiFi
network, the App starts
searching for your Smart
Module.
When the App’s search
screen displays “Found
devices” you can press
Cancel to stop the search.
NOTE: If you’re connecting
multiple Smart Modules,
wait for the search timer to
complete its search.
C. Connect the App to your WiFi network (continued)
E. Conrm your Smart Module is connected and
select it
Your Smart Module should
be listed in the devices
available in the next screen.
The Link indicator on its
front panel goes solid and
the Activity indicator starts
blinking.
Choose the Smart Module
you want to use from the list
that appears (check the MAC
The App nishes setting up the
Smart Module with your WiFi
network and displays a sample
alert to verify that it’s up and
running. In this alert screen, you
have the following options:
accesses your phone’s
alert settings so that you
can modify the App’s
permissions.
Edit name lets you choose
a different name for your
system in the alert screens.
You can choose one of the
preset names or create your own.
accesses your notication history, which shows all
of the times the App has sent alerts and what those
alerts were.
Unselect removes this Smart Module from alerts.
(You’ll have to re-select it again.)
Congure accesses other setup options.
Search looks for Smart Modules in your WiFi
network.
Done exits the screen.
address shown against the MAC address you wrote
down earlier).
Press the Select button next to the Smart Module
you want to add. Then press Next at the bottom of
the screen.
Questions? Please call our toll-free
customer service hotline at
1-800-645-7750
Loading ...