Loading ...
Loading ...
Loading ...
The first time you turn the unit on, adjust the temperature control knob
to Recommended setting and give your refrigerator time to cool down
completely before adding food. After it is fully cooled, test it and adjust
towards COLD to make less cool or towards COLDEST to cool more to
best suit your needs.
Note: Turning the temperature control knob to the OFF position will stop the
cooling cycle but does not shut off power to the unit.
To defrost freezer section, open refrigerator door and door of freezer compartment. Remove all
food from refrigerator and food and ice cube tray from freezer compartment. Place the drip tray on the
shelf under the freezer compartment. Turn the refrigerator temperature control dial to the OFF position.
Defrosting may take several hours, so store food in another refrigerator in the meantime.
Holder Bars
The inside of the refrigerator door is equipped with holder bars to keep food packages,
bottles and pop cans securely in place on the door shelves.
refrigerator
The thermostat control will click when it cycles on and off.
Boiling water, gurgling sounds or slight vibrations that are the result of the
refrigerant circulating through the cooling coils
REFRIGERA
TOR
Door Reversal
CAUTION:
Using a flat blade screwdriver, remove the plastic
hinge cover from the top of the door. Be careful not
to scratch refrigerator surface.
Using a slotted screwdriver, unscre
w the two screws
from the top hinge bracket. Remo
ve the bracket and
underlying paper gasket. Lift and remo
ve the door
from the bottom hinge pin.
Set door safely aside.
Using a thin-bladed tool, carefully pry up and
remove the top ofhole plug from top of door and
the opposite side of the cabinet;Insert plugs into
provided hole on opposite side of door and into
holes exposed by removal of top hinge bracket
.
Using a slotted screwdriver, remo
ve the two screws
attaching the bottom hinge bracket to the refrigerator
cabinet. Unscrew the foot from the other side of cabinet
.
Attach bracket and foot to opposite sides from which
Place door onto bottom hinge and close door
.
Insert top bracket hinge pin into hole in top of
door. Use the two previously removed screws
to attach back of top bracket to cabinet. Be
sure to align the paper gasket beneath the two
attachment holes in bracket.
Replace the plastic hinge co
ver over the top hinge
bracket.
y
all
tightening
7
1
3
4
5
6
2
removed.
Mount the door onto the bottom bracket. Be
sure the plastic washer is on the bracket post.
WARNING: Unplug the refrigerator before performing door reversal process. Failure to
unplug may result in serious injury or death from electrical shock.
To avoid personal injury and property damage, obtain assistance from another
person to perform the door reversal process.
CAUTION: DO NOT use boiling water to melt frost accumulation on freezer walls, as it may
damage plastic parts.
WARNING: DO NOT use a sharp or metallic instrument to remove frost from the refrigerator
interior, as damage to refrigerant tubing may occur. Tubing damage may allow flammable
refrigerant gas leakage, which can result in personal injury.
Loading ...
Loading ...
Loading ...