Loading ...
Loading ...
Loading ...
4
Environmental protection
Unpack the appliance and dispose of the packaging in an
environmentally-responsible manner.
Environmental protection
Tips for saving energy
■ Always use a correctly fitting lid for the pan.Cooking without
the lid requires four times as much energy. A glass lid allows
you to observe the cooking without having to lift the lid off.
■ Use pots and pans with level bases. Using cookware with
unlevel bases increases energy consumption.
■ The diameter of the base of your pot or pan should match the
size of the hotplate. In particular, if pots that are too small are
placed on a hotplate, energy is wasted. Please note:
Cookware manufacturers often specify the diameter of the
top of the pan. This is usually bigger than the diameter of the
base of the pan.
■ Use a small pan for small quantities of food. A large
saucepan containing little food requires more energy.
■ Use only a little water when cooking. This will save energy. It
also preserves vitamins and minerals in vegetables.
■ Switch to a lower heat setting as soon as possible.
■ Use the residual heat of the hob. For longer cooking times,
you can switch the hotplate off as early as 5 - 10 minutes
before the end of the cooking time.
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.
The control panel
The hotplates
Hotplate and residual heat indicators
The hotplate and residual heat indicators e light up when a
hotplate is warm:
■ Hotplate indicator - during operation, shortly after you have
switched on a hotplate.
■ Residual heat indicator - after cooking, when the hotplate is
still warm.
You can use the residual heat to save energy, e.g. to keep a
small dish warm or to melt chocolate.
This appliance is labelled in accordance with the
European Directive 2002/96/EU concerning used
electrical and electronic appliances (WEEE –
waste electrical and electronic equipment). The
guideline determines the framework for the return
and recycling of used appliances as applicable.
Hotplate Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
To activate: turn the hotplate control clockwise to
ð. Set the heat setting. To switch off: turn the
hotplate control to 0 and reset. Never turn the hotplate control beyond the
ð symbol to 0.
<
Halogen hotplate Note: do not look into the halogen light as the glare may dazzle the eyes.
<
Halogen hotplate with
power setting
To activate: turn the hotplate control to the
G setting. The hotplate control clicks into place. To
switch off: turn the hotplate control from the power setting to the desired heat setting.
$FWLYDWLRQ
ÍGXDOFLUFXLW
KRWSODWH
+RWSODWHFRQWURO
IRUKHDWVHWWLQJ
DGMXVWPHQW
$FWLYDWLRQ
SRZHUVHWWLQJIRUWKH
KDORJHQKRWSODWH
Loading ...
Loading ...
Loading ...