Loading ...
Loading ...
Loading ...
52
EN
3
Cooking
19-20 When the color corresponding to your
choice of cooking level appears and that
the beep sounds, open the appliance and
remove your food.
21 Close the appliance. The control panel will
light up and set itself to ‘choice of program’
mode.
Comment: the security system will turn
off automatically if no program selection
is made.
19 20
21
Successive cookings
If you wish to cook larger quantities, set in temperature the appliance again (see section 2. " Preheating ", starting
from point 9), even if cooking the same type of food or same program.
Cooking larger quantities of food:
Once your first batch of food has finished cooking:
1. Make sure that the appliance is closed and no remnants of food remain inside.
2. Select the correct cooking mode or programme (this step is necessary even if the cooking mode is the same as
for the foods you have just finished cooking).
3. Press the button " OK " to begin preheating. While preheating, the light indicating the level of cooking will blink
purple.
4. Once preheating is complete, the appliance will beep and the indicator light will stop blinking purple.
5. The appliance is ready to be used once preheating is complete. Open the grill lid and place the food inside the
appliance.
Important:
- Please note that preheating is required for each new cooking of food.
Reminder: before activating preheating, make sure that the appliance is closed and no remnants of food remain
inside.
- Then wait for preheating to finish before opening the grill and placing food inside.
Note : if the new pre-heating cycle is activated immediately after the end of the preceding cycle, the pre-heating
time will be reduced.
Loading ...
Loading ...
Loading ...