Loading ...
Loading ...
Loading ...
User instructions
10
ULTRA CLEAN
Prolongs the final hot rinse to ensure a further reduction in the bacteria
level. If the temperature in the tank falls during this stage of the program
(e.g. because the door is opened or due to a power cut), the option light
an program lights flash to warn that this additional wash phase has not
been completed successfully. This does not mean that the wash
program has been less effective than usual.
Flexi Tabs
Specifically for washing with combination detergents in tablets, which
also contain salt and rinse aid (3in1) or other agents such as glass
protector, steel rinse aids, etc. (4in1, 5in1…). When this option is
selected, salt and rinse aid will not be dispensed even if the relative
compartments contain them. If the containers are empty, the lights will
remain on.
With short programs, because there is less time for them to dissolve,
tablets may fail to wash effectively and undissolved residues may be left.
Powder detergents are more suitable for these programs.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
For further information, refer to the detergent pack.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
These products
are not suitable
for use with
excessively “hard”
water.
If the hardness level set is higher than H3, when the option is activated
the relative light flashes to indicate that the product is being used
incorrectly; the dishwasher will still work, but washing results may be
poor.
Loading ...
Loading ...
Loading ...