Loading ...
Loading ...
Loading ...
4
Technical Information
Model
FS407L FS407LBI FS408BL FS408BLBI
Color
White White Black Black
Capacity
2.8 cu. ft. 2.8 cu. ft. 2.8 cu. ft. 2.8 cu. ft.
Electrical Input
115V AC/60Hz 115V AC/60Hz 115V AC/60Hz 115V AC/60Hz
Rated Current
1.6A 1.6A 1.6A 1.6A
Power Input
90W 90W 90W 90W
Refrigerant
R134a, 3.0 oz. R134a, 3.0 oz. R134a, 3.0 oz. R134a, 3.0 oz.
Installation
Free-standing Built-in Free-standing Built-in
Unit Weight
64 lbs. 64 lbs. 64 lbs. 64 lbs.
Unit Dimensions
(W x D x H*)
19⅞" x 23¼" x
33¼"
19⅞" x 23¼" x
33¼" to 34½"
19⅞" x 23¼" x
33¼"
19⅞" x 23¼" x
33¼" to 34½"
*For models with suffix ADA, height is modified to 32” for use under lower counters
Installation Instructions
Before Using Your Freezer
• Remove the exterior and interior packing.
:
• Check to be sure you have all of the following parts: 4 drawers, 1 handle with screws
and handle seal, and 2 keys.
• Before connecting the unit to the power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
• Remove the drawers and clean them and the interior surfaces of the unit with
lukewarm water using a soft cloth.
Installing the Freezer
• Place your unit on a floor that is strong enough to support the appliance when it is
fully loaded. To level your unit, adjust the leveling legs at the bottom.
:
• Models FS407L and FS408BL are designed to be free-standing only, and should not
be recessed or built in. On the other hand, models FS407LBI and FS408BLBI are
specifically designed to be built-in.
• Models FS407L and FS408BL
•
: When installing, allow at least 4 inches of space at the
back and sides of the unit, which will allow the proper air circulation to cool the
compressor and condenser.
Models FS407LBI and FS408BLBI: These built-in models are designed to be
installed under the counter in a 21-inch opening. When installing, provide the
following clearances to ensure the best operation and proper ventilation: 1/4” on
both sides, 2” at the rear and 1/16” at the top. Be sure that airflow under the
THESE FREEZERS ARE DESIGNED FOR MEDICAL OR PHARMACEUTICAL USE ONLY.
THEY ARE NOT INTENDED FOR USE AS HOUSEHOLD FREEZERS.
Loading ...
Loading ...
Loading ...