Loading ...
Loading ...
Loading ...
157
3-5. Opening, closing the windows and moon roof
3
Operation of each component
SEQUOIA_OM_USA_OM0C013U_19MY
■ When the moon roof does not close normally
Perform the following procedure:
● If the moon roof closes but then re-opens slightly
Stop the vehicle.
Press and hold the “SLIDE” switch.
*
1
The moon roof will close, reopen and pause for approximately 10 sec-
onds.
*
2
Then it will close again, tilt up and stop.
Check to make sure that the moon roof is completely stopped and then
release the switch.
*
1
: If the switch is released at the incorrect time, the procedure will have to
be performed again from the beginning.
*
2
: If the switch is released after the above mentioned 10 seconds pause,
automatic operation will be disabled. In that case, press and hold the
“SLIDE” or “TILT” switch, and the moon roof will tilt up and stop. Check to
make sure that the moon roof is completely stopped and then release the
switch.
If the moon roof does not fully close even after performing the above proce-
dure correctly, have the vehicle inspected by your Toyota dealer.
■ Moon roof open reminder function
The buzzer sounds and a message is shown on the multi-information display
in the instrument cluster when the engine switch is turned off and the driver’s
door is opened with the moon roof open.
■ Door lock linked moon roof operation
The moon roof can be opened and closed using the key. (P. 104)
■ Customization that can be configured at Toyota dealer
Settings (e.g. key linked operation) can be changed.
(Customizable features P. 516)
1
2
3
Loading ...
Loading ...
Loading ...