14712 User Manual

Loading ...

Canceling a Cycle

1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.

2. To cancel selections and/or drain, press and hold CANCEL/DRAIN until the light turns on. The drain will not begin until the

door is closed.

3. Close the door. The dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain

completely. The Cancel/Drain light will turn o after 2 minutes.

Changing a Cycle After Dishwasher Is Started

You can interrupt a cycle and restart your dishwasher from the beginning using the following procedure.

1. See steps in the previous “Canceling a Cycle” section for canceling the current cycle.

2. Check that the detergent dispenser cover is still closed. If the cover is open, you will need to rell the detergent dispenser

before restarting your new cycle.

3. Select a new cycle and options.

4. Press START/RESUME and close the door within 4 seconds.

Adding a Dish After Dishwasher Is Started

1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.

2. If the detergent dispenser is closed, you may add items to the load.

3. Press START/RESUME.

4. Close the door. The door must be closed within 4 seconds of pressing Start/Resume, or the dishwasher will beep several times

and the cycle will not resume.

Loading ...

Kenmore Elite 14712 24" Built-In Dishwasher