Loading ...
Loading ...
Loading ...
To select a memorized position, do
this:
Make sure the parking brake is set
and the shift lever is in Park
(automatic).
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button’s memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your vehicle’s battery goes
dead or is disconnected.
To cancel the storing procedure
after pressing the SET button, do
any of the following:
Press the SET button again within
5 seconds.
Fail to press a memory button
within 5 seconds.
Readjust the seat position.
Turn the ignition switch out from
the ON (II) position.Press and release the SET button.
You will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current position of the driver’s
seat is now stored.
1.
2.
3.
Selecting a Memorized Position
Driving Position Memory System
104
MEMORY BUTTONS
MEMORY BUTTONS
SET BUTTONS
2012 Accord Coupe
Instruments and Controls
Loading ...
Loading ...
Loading ...