Loading ...
Loading ...
Loading ...
22
PROGRAM FOR AUTOMATIC SWITCHING OFF THE COOKING ZONES
(NOT AVAILABLE FOR MODEL IN FIG. 1.1)
- This function permits to set a timer from 1 to 99 minutes for automatic turning OFF
the cooking zones.
- As many luminous points as there are cooking zones are located around the timer dis-
play to indicate the zone on which the timer is activated.
To set the automatic switching OFF program, the cooking zone shall be turned ON
and adjusted at the required power level.
1. The luminous point next to the display of
the cooking zone to be programmed,
shall be blinking. If not, press the key
to activate the blinker.
The point at the bottom right side of the dis-
play will light up to indicate its activation.
2.Press the timer key ; then release the
key.
The timer display will readout
00
and will
visualize the blinking point of the involved
cooking zone.
3. Method A
Setting in the
0
to
99
minutes range.
Press the timer key and keep it
pressed until the desired setting is
achieved.
To count back, press the key
.
Note: Each pressure on the timer or key, will increase the setting by 1 second,
but a continuous pressure will cause a dynamic increase at a growing speed.
Luminous
point
Cooking zone luminous point
Loading ...
Loading ...
Loading ...