Loading ...
Loading ...
Loading ...
EN
User manual
11
HOW TO USE THE APPLIANCE
FIRST TIME USE
Once the appliance has been installed, and before it is used
for the rst time, run a wash cycle with detergent and no
laundry, by setting the “Auto-Clean” cycle.
DAILY USE
PREPARING THE LAUNDRY
Empty the pockets
• Objects such as coins or lighters can damage the
washing machine and the drum. Check all buttons.
Divide the laundry according to
• Type of fabric (cotton, mixed bres, synthetics, wool,
garments to be hand-washed). Colour (separate coloured
garments from whites, wash new coloured garments
separately). Delicates (small garments – such as nylon
stockings – and items with hooks – such as bras: insert
them in a fabric bag).
RUNNING A WASH CYCLE
Rapid programming
1. Open the door. Load the laundry while making
sure not to exceed the maximum load quantity
indicated in the cycle table.
2. Pull out the detergent dispenser drawer and pour
the detergent into the relevant compartments as
described in “DETERGENT DISPENSER DRAWER”
section.
3. Close the door.
4. Press the PUSH & WASH button to start the
wash cycle.
Traditional programming
1. Press the ON/OFF button ; the START/PAUSE indicator
light will ash slowly green.
2. Open the door. Load the laundry while making
sure not to exceed the maximum load quantity
indicated in the Wash Cycle Table.
3. Pull out the detergent dispenser drawer and pour
the detergent into the relevant compartments as
described in “DETERGENT DISPENSER DRAWER”
section.
4. Close the door.
5. Use the WASH CYCLE selector knob to
select the desired wash cycle: it will be associated with
a specic temperature and spin speed that can be
modied. The duration of the cycle will appear on the
display.
6. Modify the temperature and/or spin speed: the machine
automatically displays the maximum temperature and
spin speed values set for the selected cycle, or the
most recently-used settings if they are compatible with
the selected cycle. Pressing the
40°
60°
button gradually
reduces the temperature down to the cold wash “OFF”
setting. Pressing the button gradually reduces the
spin speed until it is completely excluded (“OFF” setting).
Pressing these buttons again restores the maximum
values.
7. Select the desired options.
- If the selected option is not compatible with the set wash cycle, the
indicator light will ash and the option will not be activated.
- If the selected option is not compatible with another previously
selected option, the indicator light will ash accompanied by a
buzzer (3 beeps), and only the latter option will be activated; the
indicator light corresponding to the activated option will turn on.
8. Press the START/PAUSE button to start the wash cycle;
the relative indicator light will light up steady green and
the door will lock ( symbol on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button
again; the indicator light will ash amber. If the symbol is
not lit, the door may be opened. To start the wash cycle from
the point at which it was interrupted, press the START/PAUSE
button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the
door cannot be opened. While a wash cycle is running, the
door remains locked. To open the door while a cycle is under
way, for example, to add or remove garments, press the
START/PAUSE button to pause the cycle; the indicator light
will ash amber. If the symbol is not lit, the door may be
opened. Press the START/PAUSE button again to continue
the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the
washing machine using the START/PAUSE button (the
relative indicator light will ash amber), then select the
desired cycle and press the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold
the ON/OFF button. The cycle will be stopped and the
machine will switch o.
Loading ...
Loading ...
Loading ...