Loading ...
Loading ...
Loading ...
Frequently Asked Questions
56
Problem Possible cause and solution
The ignitor does not
function properly.
The fuse in the building's wiring system was tripped.
If necessary, contact a qualified electrician or Cus-
tomer Service for assistance.
There is food debris stuck between the ignitor and the
burner cap.
Remove the debris. (See "Cleaning and care" for
more information.)
The Grill and Griddle
cannot be turned on
The grill and the griddle plate are turned off as soon
as the Self clean program is started.
This is not a fault. The safety shut-off has been acti-
vated.
The controls make further attempts at re-ignition at
approx. one minute intervals (max. 5 attempts).
Turn off the grill and griddle control knob. As soon
as Self clean is finished the grill and the griddle
plate can be switched on again.
The grill and griddle cannot be turned on during Self
clean.
This is not a fault. The safety shut-off has been acti-
vated.
The controls make further attempts at re-ignition at
approx. one minute intervals (max. 5 attempts).
Turn off the grill and griddle control knob. As soon
as Self clean is finished the grill and the griddle
plate can be switched on again.
During heating, an LP
gas griddle plate emits
a buzzing or growling
sound.
This is not an error. The sound turns off after a few
seconds.
Loading ...
Loading ...
Loading ...