Loading ...
Loading ...
Loading ...
14
CARE AND CLEANING
CLEANING
Clean the beverage center once a month to avoid buildup
of odors. Wipe up spills immediately.
TO CLEAN YOUR BEVERAGE CENTER:
1. Unplug beverage center or disconnect power.
2. Empty and remove all shelves and racks from inside
the beverage center.
3. Hand wash, rinse, and dry removable parts and
interior surfaces thoroughly. Use a clean sponge or
soft cloth and a mild detergent in warm water.
To avoid damaging wooden tines and trim
pieces, wipe them off with a clean sponge or
soft cloth and warm water. Do not use detergent
or immerse the entire rack into water when
cleaning.
Do not use abrasive or harsh cleaners such as
window sprays, scouring cleansers, flammable
fluids, cleaning waxes, concentrated detergents,
bleaches or cleansers containing petroleum
products on plastic parts, interior and door liners
or gaskets. Do not use paper towels, scouring
pads, or other harsh cleaning tools. These can
scratch or damage materials.
To help remove odors, you can wash interior walls
with a mixture of warm water and baking soda
[2 tbs to 1 qt (26 g to 0.95 L) of water].
4. Wash stainless steel and painted metal exteriors with
a clean sponge or soft cloth and a mild detergent in
warm water. Do not use abrasive or harsh cleaners,
or cleaners containing chlorine. These can scratch or
damage materials. Dry thoroughly with a soft cloth.
NOTE: To keep your stainless steel beverage center
looking like new and to remove minor scuffs or marks,
it is recommended that you use the manufacturer’s
approved Stainless Steel Cleaner and Polish. To order
the cleaner, refer “Accessories” section.
IMPORTANT:
This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and
Polish to come into contact with any plastic parts
such as the trim pieces, dispenser covers or door
gaskets. If unintentional contact does occur, clean
plastic part with a sponge and mild detergent in
warm water. Dry thoroughly with a soft cloth.
5. Replace the racks.
6. Clean the condenser coils regularly. They are located
behind the base grille. Coils may need to be cleaned
as often as every other month. This may help save
energy.
Remove the base grille to access condenser for
cleaning. Refer “Removing Base Grille” section.
REMOVING BASE GRILLE
You must remove the base grille to access the condenser
coils for cleaning.
TO REMOVE THE BASE GRILLE:
1. Open the beverage center door.
2. Using a Phillips screwdriver, remove the two screws.
3. Remove the base grille.
TO REPLACE THE BASE GRILLE:
1. Open the beverage center door.
2. Position the base grille so that both tabs align and
the base grille snaps into place. Replace two screws.
Tighten the screws.
VACATION CARE
If you choose to turn the beverage center off before you
leave, follow these steps.
1. Remove all beverage contents from the beverage
center.
2. Unplug the beverage center.
3. Clean the beverage center. Refer “Cleaning” section.
4. Tape a rubber or wood block to the top of the door
to prop it open far enough for air to get in. This stops
odor and mold from building up.
MOVING CARE
When you are moving your beverage center to a new
home, follow these steps to prepare it for the move.
1. Remove all beverage contents from the beverage
center.
2. Unplug the beverage center.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and
tape them together so they don’t shift and rattle
during the move.
5. Tape the doors shut and tape the power cord to the
beverage center.
When you get to your new home, put everything back
and refer to the “Installation Instructions” received with
the beverage center.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
A
A. Screws
Loading ...
Loading ...
Loading ...