Loading ...
Loading ...
Loading ...
E-33
ENGLISH
References
- Troubleshooting Chart -
Troubleshooting Chart
Many potential "problems" can be resolved by the owner without calling a service
technician.
If something is wrong with this product, check the following before calling your autho-
rised SHARP dealer or service centre.
„
General
„
CD player
„
Tuner
„
Cassette deck
„
Remote control
„
Condensation
Symptom Possible cause
z
The clock is not on time.
z
Did a power failure occur? Reset the
clock. (Refer to page 11.)
z
When a button is pressed, the unit
does not respond.
z
Set this unit to the power stand-by mode
and then turn it back on.
z
If the unit still malfunctions, reset it. (Refer
to step 3 under "If trouble occurs" on page
34.)
z
No sound is heard.
z
Is the volume level set to "0"?
z
Are the headphones connected?
z
Are the speaker wires disconnected?
Symptom Possible cause
z
Playback does not start.
z
Is the disc loaded upside down?
z
Playback stops in the middle or is
not performed properly.
z
Does the disc satisfy the standards?
z
Is the disc distorted or scratched?
z
Playback sounds are skipped, or
stopped in the middle of a track.
z
Is the unit located near excessive vibra-
tions?
z
Is the disc very dirty?
z
Has condensation formed inside the unit?
Symptom Possible cause
z
Radio makes unusual noise con-
secutively.
z
Is the unit placed near the TV or comput-
er?
z
Is the FM aerial or AM loop aerial placed
properly? Move the AC power lead away
from the aerial if located near.
Symptom Possible cause
z
Cannot record.
z
Is the erase-prevention tab removed?
z
Cannot record tracks with proper
sound quality.
z
Is it a normal tape? (You cannot record on
a metal or CrO tape.)
z
Cannot erase completely.
z
Sound skipping.
z
Is there any slack?
z
Is the tape stretched?
z
Cannot hear treble.
z
Are the capstans, pinch rollers, or heads
dirty?
z
Sound fluctuation.
z
Cannot remove the tape.
z
If a power failure occurs during playback,
the heads remain engaged with the tape.
Do not open the compartment forcibly.
Wait until electricity resumes.
Symptom Possible cause
z
The remote control does not oper-
ate.
z
Is the AC power lead of the unit plugged
in?
z
Is the battery polarity respected?
z
Are the batteries dead?
z
Is the distance or angle incorrect?
z
Does the remote control sensor receive
strong light?
Sudden temperature changes, storage or opera-
tion in an extremely humid environment may
cause condensation inside the cabinet (CD pick-
up, tape heads, etc.) or on the transmitter on the
remote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc
(or cassette) in the unit until normal playback is
possible (about 1 hour). Wipe off any condensa-
tion on the transmitter with a soft cloth before op-
erating the unit.
Loading ...
Loading ...
Loading ...