Loading ...
Loading ...
Loading ...
19
3. Pull the lter out of the housing.
4. Remove the water lter cap from the water lter being
replaced.
5. Install the water lter cap onto the new lter. Be sure to align
the arrows so the groves in lter align with ribs in lter cap.
6. Insert the lter into the housing.
7. Twist the water lter and turn 90° clockwise until it locks into
place and the arrows are aligned.
8. Push the water lter door closed.
The Water Filter Status Lights
The water lter status lights will help you know when to change
your water lter.
■ ORDER FILTER (yellow)—It is almost time to change the
water lter. “Order Filter” display is on all of the time but
off in Showroom mode and Sabbath mode.
■ REPLACE FILTER (red)—Replace the water lter. While you
are dispensing water, “Replace Filter” will blink 7 times and
an alert tone will sound 3 times.
NOTE: “REPLACE FILTER” will remain illuminated if the lter
is not reset on the user interface (UI).
■ RESET FILTER—Touch MAX COOL and MAX ICE for
3 seconds to reset water lter. The display will do a
3-second countdown, then ash the icon and play a tone.
Loading ...
Loading ...
Loading ...