Loading ...
Loading ...
Loading ...
24 25
Pump Start Relay Wiring
A pump start relay serves as a switch that activates 110-220VAC
power to the pump when the Rachio controller’s master valve is
enabled. Since the Rachio controller outputs 24VAC, a pump start
relay is required when using a pump with the Rachio controller.
Install in the “M” terminal slot, and enable the Master Valve from
the device settings under Advanced within the Rachio App. The
controller does not provide main power for a pump.
Hydraulic Indexing Valve Wiring
Indexing valves offer a central hub to automate multiple zoned
irrigation systems. Usually consisting of one inlet and 3+ outlets,
indexing valves can operate on city water or pumps. An indexing
valve will water on a zone-by-zone basis, diverting the water
supply from one outlet to another in a rotational direction. The
order of the zones cannot be changed on an indexing valve and
are predetermined by the order in which they were installed. For
more information, please visit www.rachio.com/indexing.
Install in the “M” terminal slot, and enable the Master Valve in the
Rachio App.
If your system’s water supply comes from city water, install
following the Master Valve wiring instructions, page 22.
If your water supply is a pump, a Pump Start Relay is
required when using a pump with an Indexing Valve.
For detailed instructions, visit rachio.com/pump.
Loading ...
Loading ...
Loading ...