Loading ...
Loading ...
Loading ...
USING YOUR REFRIGERATOR
20
WATER DISPENSER
Your refrigerator has a mechanism that dispatch cool
water and ice cubes without open the door.
• Tray can be easily removed by pressing and pulling it.
• First push the tray in the area with the word ‘PUSH’,
then place your finger in the center hole and upwards,
finally takes out the tray.
WARNING
Do not put your hands into the
water & ice dispenser opening.
Doing so may cause an injury to
your hand.
CAUTION
When opening the container with
the small opening, use it near the
opening of the water or ice
dispenser as close as possible.
For best performance, use a
container that is smaller than the
dispenser opening.
• To assemble the ice storage bin, push it while
slightly lifting it .
Make sure it is fully engaged into the auger drive .
The ice bin stores the ice cubes made by the ice maker.
If you need remove the Ice storage bin, please follow the
next steps:
NOTE: Use both hands to remove the ice bin to avoid
dropping it. If the ice bin does not slide into place
easily, twist the drive device slightly.
• Hold the ice storage bin as shown in the right figure
and pull it out while slightly lifting it .
ICE STORAGE BIN
1
2
• Lift the icemaker cover and pull it out as shown in
the figure below.
ICEMAKER
If you need acces to the Icemaker, follow these steps:
• Remove the ice storage bin. See ICE STORAGE BIN
for reference.
COVER
1
2
Loading ...
Loading ...
Loading ...