Loading ...
Loading ...
Loading ...
Setting the rinse aid dosage
You can adjust the rinse aid dosage to
optimize the results.
The rinse aid dosage can be set at
levels between 0 and 6 ml. The factory
setting is 3 ml of rinse aid. This is just a
recommendation.
If the dishes are spotty:
^
Use a higher setting.
If the dishes are cloudy or streaky:
^
Use a lower setting.
^
Press the K button to turn the
dishwasher off.
^
Hold down the Program button and
simultaneously turn the dishwasher
on using the K button.
Keep the Program button pressed for
at least four seconds until the lower
right program indicator lights up.
If it does not come on, start over.
^
Press the Turbo button three times.
The Turbo indicator light flashes 3 times
at short intervals.
The time display shows the flashing
sequence p3.
The set value is shown in the time
display after the P.
^ Select the desired dosage with the
Program button.
Every touch of the button increases
the level.
The setting is saved immediately.
^
Press the K button to turn the
dishwasher off.
Before using for the first time
13
Loading ...
Loading ...
Loading ...