Loading ...
Loading ...
Loading ...
11
Freezer
The freezer compartment will become progressively
covered with frost. This should be removed with the
special plastic scraper provided, whenever the
thickness of the frost reaches 6 mm (¼”).
During this operation it is not necessary to switch of
the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
and it is advisable to perform this operation when the
appliance is empty.
For complete defrosting (once or twice a year)
proceed as follows:
1. Disconnect the appliance from the mains.
2. Remove any food from inside the freezer, wrap it in
several sheets of newspaper and store in a cool,
dry place. Ensure that the fridge door is not
opened to protect the food in the refrigerator while
defrosting the freezer.
3. When defrosting is complete, dry the interior
thoroughly.
4. Reconnect the appliance to the mains, set the
thermostat control knob to the maximum setting.
Leave the appliance to run for at least two hours.
5. Replace the previously removed food.
6. Return the thermostat control knob to a medium
setting.
Important
A temperature rise of the frozen food packs during
defrosting may shorten their safe storage life.
Never use sharp metal tools to scrape off frost from
the evaporator as this could damage the appliance
beyond repair.
)
How to change the bulb
Should the light fail to work you can change it as
below:
Break the circuit of the appliance.
Press the rear hook (1) and at the same time slide the
cover in the direction indicated by arrow (2). So the
bulb can be replaced. (Bulb type: 230-240 V, 15 W,
E 14 thread)
After changing the bulb replace the cover, snap it in
place and apply voltage to the appliance.
Loading ...
Loading ...
Loading ...