AE L7FEC146R GWashing Machine

User Manual - Page 37

For L7FEC146R. Series: 7000

PDF File Manual, 48 pages, Read Online | Download pdf file

L7FEC146R photo
Loading ...
Loading ...
Loading ...
Problem Possible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is no damaged fuse in the fuse box.
Make sure that the Start/Pause has been touched.
If the delay start is set, cancel the setting or wait for the end of
countdown.
Deactivate the Child Lock function if it is on.
Check the position of the knob on the selected programme.
The appliance fills with
water and drains im-
mediately.
Make sure that the drain hose is in the correct position. The
hose may be positioned too low. Refer to "Installation instruc-
tion".
The spin phase does
not operate or the
washing cycle lasts
longer than usual.
Set the spin programme.
Adjust manually the items in the tub and start the spin phase
again. This problem may be caused by balance problems.
There is water on the
floor.
Make sure that the couplings of the water hoses are tight and
there is not water leakages.
Make sure that the water inlet hose and the drain hose have
no damages.
Make sure you use the correct detergent and the correct
quantity of it.
You cannot open the
appliance door.
Make sure that a washing programme that ends with water in
tub, has not been selected.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in the
drum.
Make sure that the appliance receives electrical power.
This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.
If you need to open the door, please read carefully "Emer-
gency door opening".
The appliance makes
an unusual noise and
vibrates.
Make sure the levelling of the appliance is correct. Refer to
"Installation instruction".
Make sure that the packaging and/or the transit bolts are re-
moved. Refer to "Installation instruction".
Add more laundry in the drum. The load may be too small.
The washing results
are not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
Too much foam in the
drum during the wash-
ing cycle.
Reduce the quantity of detergent.
ENGLISH 37
Loading ...
Loading ...
Loading ...