Loading ...
Loading ...
Loading ...
Cleaning function en
21
1. Remove any accessories from the cooking
compartment.
2. Mix 0.4 litres water (not distilled water) with a drop of
washing-up liquid and pour into the middle of the
cooking compartment floor.
3. Use the function selector to set the cleaning
functions 2.
The 2 symbol and the cleaning functions appears
in the display. The first cleaning function is
highlighted.
4. Press the ) or ( button repeatedly until the š symbol
is highlighted.
"EASY" appears in the display.
5. Turn the temperature selector.
"On" appears in the display.
The cleaning aid starts after a few seconds. The
cooking time counts down in the display.
Note: The interior lighting remains off while the cleaning
aid is running.
If œ flashes in the display when the function is switched
on, this indicates that the cooking compartment has not
completely cooled down. Switch off the appliance. Wait
until the cooking compartment has cooled down and
switch the cleaning aid back on.
Once the cleaning aid has run through to the end, an
audible signal sounds.
Subsequent cleaning
The remaining water in the cooking compartment must
be removed promptly. Do not leave the remaining water
in the cooking compartment for a long time (e.g.
overnight). The appliance must not be operated when
the cooking compartment is still wet or damp.
1. Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2. Clean the smooth surfaces in the cooking
compartment with a dish cloth or a soft brush.
Stubborn residues can be removed using a stainless
steel scouring pad.
3. Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4. To switch off, turn the function selector to the zero
setting.
5. Depending on the appliance type, open or lower the
appliance door to the stop position (approx. 30°)
and leave it open for approx. one hour to allow the
enamel surfaces in the cooking compartment to dry
thoroughly. Alternatively, you can also run the rapid
drying function for the cooking compartment.
Running the rapid drying function for the cooking
compartment
1. Once the cleaning aid has been run through,
depending on the appliance type, open or lower the
appliance door to the stop position (approx. 30°).
2. Start CircoTherm hot air at 50 °C.
3. After five minutes, switch off the appliance and close
the appliance door.
Removing heavy deposits of dirt
You have several options for removing particularly
stubborn deposits of dirt.
■ Leave the soapy water to work for some time before
starting the cleaning aid.
■ Rub soapy water onto the dirt on the smooth
surfaces before starting the cleaning aid.
■ Repeat the cleaning aid after the cooking
compartment has cooled down.
Loading ...
Loading ...
Loading ...