Loading ...
Loading ...
Loading ...
Using the Pre-Collision Assist System
The system is active at speeds above
approximately 3 mph (5 km/h) and pedestrian
detection is active at speeds up to 50 mph
(80 km/h).
E156130
If your vehicle is rapidly approaching another
stationary vehicle, a vehicle traveling in the
same direction as yours, or a pedestrian
within your driving path, the system is
designed to provide three levels of
functionality:
1. Alert
2. Brake Support
3. Active Braking
E156131
Alert: When activated, a flashing visual
warning displays and an audible warning
chime sounds.
Brake Support: Assists the driver in reducing
collision speed by preparing the brake
system for rapid braking. Brake support does
not automatically activate the brakes, but if
the brake pedal is pressed even lightly by
the driver, brake support could add
additional braking up to full force.
Active Braking: Active braking may activate
if the system determines that a collision is
imminent. The system may help the driver
reduce impact damage or avoid the crash
completely.
Note: If you perceive Pre-Collision Assist
alerts as being too frequent or disturbing,
then you can reduce the alert sensitivity,
though the manufacturer recommends using
the highest sensitivity setting where possible.
Setting lower sensitivity would lead to fewer
and later system warnings.
Distance Indication and Alert
Distance indication and alert is a function
that provides you with a graphical indication
of the time gap to other preceding vehicles
traveling in the same direction. The distance
indication and alert screen in the information
display shows one of the following graphics.
E190004
If the time gap to a preceding vehicle is
small, a red visual indication displays.
232
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Driving Aids
Loading ...
Loading ...
Loading ...