Loading ...
Loading ...
Loading ...
Hopper
Strainer
Chamber
Spinning brush
www.hurom.com I 09
SLOW JUICER ASSEMBLY IN DETAIL
Firmly insert the extraction seal located at the bottom of the chamber into the pulp outlet.
Make sure the outer groove of the chamber is completely aligned with the base ridge.
1
Assemble the parts in the order of chamber> spinning brush> strainer> auger> hopper (or assemble the spinning brush into the chamber then fit
strainer ridge in the chamber inner groove). Make sure all the arrows of chamber [ ], strainer [ ] and hopper [ OPEN ] are aligned in a vertical line.
2,3
Chamber outer groove
Base ridge
Strainer
ridge
BOTTOM
OF THE
STRAINER
INSIDE
THE
CHAMBER
Chamber
inner
groove
Extraction
seal
Hopper
rear arrow
Align the hopper arrow with the base arrow located at the rear of the appliance.
The hopper will not close if the parts are assembled incorrectly.
4
Auger
2 4PJ12235-HH series_V.01.indd 11 2013-06-07 오후 7:41:05
Loading ...
Loading ...
Loading ...