Loading ...
Loading ...
Loading ...
5
How to Use
This appliance is for household use only.
GETTING STARTED
• Remove all packing materials, any stickers and the plastic band around the power plug.
• To register your product, go to www.prodprotect.com/russellhobbs.
• Wash all parts as instructed in CARE and MAINTENANCE section.
• Select a level surface where this unit is to be used allowing enough space for
steam to escape without damage to counters, cabinets and walls.
PARTS
1. Lid
2. Water reservoir
3. Removable lter
(part no. CM3100-01)
4. Filter holder (part no. CM3100-02)
5. Water gauge
6. Hot plate
7. On/o switch
8. 1.25L carafe (part no. CM3100-03)
9. Coee brewing progress gauge
10. 1-cup coee scoop
(part no. CM3100-04)
BEFORE USING FOR THE FIRST TIME
• Fill the reservoir to the max mark, and run the appliance without coee.
• Let it cool, discard the water, then use it normally.
FILLING
1. Remove the carafe from the hotplate.
2. Open the lid.
3. Fill with at least 2 cups of water, but not above the max mark.
4. Place the removable lter or a paper lter (not included) into the lter holder.
5. Put 1 scoop of lter-ground coee into the lter for each cup.
6. Close the lid.
7. Replace the carafe on the hotplate.
MAKING COFFEE
CAUTION: DO NOT open the lid during brewing as there is the potential risk of scalding.
1. Put the plug into the power socket.
2. Move the switch to I. The light will come on.
3. Shortly afterwards, coee will start to drip into the carafe.
4. When it’s done, the hotplate will keep the carafe warm. After 40 minutes, the
hotplate and appliance will shut down.
5. Move the switch to O to turn o.
6. Unplug, and let the appliance and carafe cool down fully before cleaning, or for
about 10 minutes before relling.
7. For the best avour, drink the coee within 40 minutes of brewing.
Loading ...
Loading ...
Loading ...