Loading ...
Loading ...
Loading ...
5
CYCLE GUIDE
CYCLES LOAD TYPES FEATURES TEMPERATURE
SENSOR DRY or
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness
setting.
Depending on model, temperature may be selected on cycle knob or be a separate control.
AUTOMATIC DRY
High Heat
Jeans, heavy work
clothes, towels
Gives the best drying in the shortest time. Drying time varies
based on fabric type, load size, and dryness setting.
High
AUTOMATIC DRY
Low Heat
Casual, shirts, pants,
lightweight items
Gives the best drying in the shortest time. Drying time varies
based on fabric type, load size, and dryness setting.
Low
Jeans Denim Thoroughly dries denims. Medium or High
Very Dry or
More Dry
Jeans, heavy work
clothes
This dryness level removes more load moisture than the
Energy Preferred cycle. Dries heavy seams.
High or Low
*Energy Preferred
Automatic Setting
Most loads Use this dryness level as your starting point for automatic
drying.
Any
Delicate Small loads,
lightweight items
Gently dries delicate items. Low or Ex-Low
Less Dry Most loads This dryness level removes less moisture than the Energy
Preferred cycle. Seams of garment may feel slightly damp.
Use for loads you may want to complete drying on a hanger.
High or Low
TIMED DRY Will run the dryer for the specied time on the control.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Timed Dry
High Heat
Heavy or bulky items Completes drying if items are still damp. High
Heavy Dry Large or heavy items
such as thick towels
or robes
Evenly dries large or heavy loads. High
Damp Dry Any load Dries items to a damp level or for items that do not require
an entire drying cycle.
Any
Freshen Up Any load Helps to smooth out wrinkles from items, such as clothes
packed in a suitcase or items left in the dryer too long.
High
Air Fluff Rubber, plastic, heat
sensitive fabrics
No-heat drying. No heat
SPECIAL SETTINGS These settings are added at the end of certain cycles to reduce wrinkling.
Cool Down All loads This is the last step in a cycle that uses heat. The load is
cooled slowly to reduce wrinkling and make it easier to
handle.
No heat
Wrinkle Prevent Any load After a cycle is complete, the load is periodically tumbled to
avoid wrinkles until you are ready to remove it.
No heat
Loading ...
Loading ...
Loading ...