Loading ...
Loading ...
Loading ...
12
IGBF
gono leggermente con
olio lubrificante quando
sono ancora tiepide.
istruzioni
per
l’installatore
installazione
Le presenti istruzioni sono
rivolte all’installatore
qualificato quale guida
all’installazione,
regolazione e
manutenzione secondo le
leggi e le normative in
vigore.
Gli interventi devono
sempre essere effettuati ad
apparecchiatura disinserita
elettricamente.
posizionamento
(Fig. 4)
L’apparecchio è previsto
per essere incassato in un
piano di lavoro come
illustrato nell’apposita
figura.
Predisporre su tutto il
perimetro del piano
il sigillante a corredo.
collegamento
elettrico
(Fig. 5)
Prima di effettuare
l’allacciamento elettrico
accertarsi che:
- le caratteristiche
dell’impianto siano tali da
soddisfare quanto indicato
sulla targa matricola
applicata sul fondo del
piano;
- che l’impianto sia munito
means of a wet rag
and lightly oiled with
lubricant when they
are still tepid.
instructions for
the installation
technician
installation
These instructions are
turned to the skilled
installer as a guide to
installation, regulation
and maintenance in
compliance with the laws
and the rules in force.
Any of these operations
must always be carried
out when the appliance
has been disconnected
from the electric system.
positioning
(Fig. 4)
The apparatus is
provided to be built-in a
work-top as shown in the
special figure.
Present the sealing agent
along all the perimeter.
electrical
connection
(Fig. 5)
Before carrying out the
electrical connection be
sure that:
- the characteristics of the
system are such as to
satisfy what indicated on
the part number plate
applied to the bottom of
the work-top;
- that the system is
légérement huilées (huile
lubrifiante) alors qu’elles
sont encore tièdes.
modalités
d’installation
installation
Ces instructions sont
destinées aux personnes
qualifiées pour
l’installation, le réglage et
l’entretien selon les
normes et lois en vigueur.
Les interventions doivent
toujours être effectuées
quand l’appareil est
débranché.
positionnement
(Fig. 4)
Cet appareil est prévu pour
être encastré dans un plan
de travail.
Mettre sur tout le
pourtour de la découpe le
ruban adhésif livré avec
l’appareil.
raccordement
électrique
(Fig. 5)
Avant de procéder au
raccordement électrique,
s’assurer que:
- les caractéristiques de
l’installation soit de nature
à satisfaire à toutes les
indications portées sur la
plaque signalétique située
sous l’appareil;
- que l’installation dispose
Loading ...
Loading ...
Loading ...