Loading ...
Loading ...
Loading ...
Page 10
OPERATION
LED WORKLIGHT (FIG. 3)
FIG. 3
The LED worklight, located above the
tool-less blade clamp, provides additional
lighting on the surface of the workpiece
for operation in lower-light areas. The LED
worklight will come on automatically when
the trigger switch is depressed, and it will
turn off when the trigger switch is released.
INSTALLING SAW BLADE (FIG. 4)
FIG. 4
1. Remove the battery pack.
2. Turn the tool upside down and press the
blade clamp lever as far as it can go; the
lever will not rebound back.
3. Insert the blade into the slot until it locks
into place automatically
LED Worklight
REMOVING SAW BLADE (FIG. 4)
CAUTION:
Allow the blade to
cool after use. The blade can become
dangerously hot.
1. Remove the battery pack.
2. Press down on the blade clamp lever to
remove the blade.
3. The clamp stays open when the blade
is removed; it automatically locks when
you push in another blade, providing for
very easy one-hand blade change.
BLADE SELECTION
To obtain the best performance from the
saw, it is important to select the correct
blade for the particular application and
type of material you wish to cut. By doing
this, you will get a smoother, faster cut and
prolong blade life.
ORBIT ADJUSTMENT (FIG. 5)
FIG. 5
The jigsaw has orbital action whereby the
blade roller guide moves back and forth to
make the blade swing slightly as it cuts.
Orbital action increases the speed of cut but
may result in a rougher finish to the cut in
some materials.
Loading ...
Loading ...
Loading ...