LIVOWALNY 120910001 Tire Inflator Air Compressor

Model: Air Compressor Compatible With Milwaukee 18V battery
SKU: SKU120910001

1. Overview

This is a cordless, portable tire inflator and air compressor. It is powered by a compatible Milwaukee M18 18V battery (not included). The unit is designed for inflating tires and other inflatables for cars, SUVs, motorcycles, bicycles, sports balls, and pool toys.

1.1 What's in the Box

• Tire Inflator Main Unit
• Air Hose
• 4 Nozzle Attachments (for different valve types)
• User Manual (this guide)

Note: A compatible Milwaukee M18 18V battery and charger are required for operation and are not included.

2. Key Features & Specifications

2.1 Specifications

2.2 Feature Details

Digital Display & Controls

• LCD Screen: Shows both the target pressure (set value) and the current real-time pressure.
• Unit Button: Cycles through pressure units: PSI, bar, kPa, Kg/cm².
Mode Button: Selects between four preset inflation modes and a custom mode:
• Car Mode: Preset limit of 60 PSI for safety.
• Motorcycle Mode
• Bicycle Mode
• Basketball Mode
• Custom Mode: Allows manual pressure setting from 0 to 160 PSI.
• + / - Buttons: Increase or decrease the target pressure setting.
• Power/Light Button: Turns the inflator on/off. Press and hold to toggle the built-in LED flashlight between steady light and SOS modes.
• Low Battery Indicator: The display will show a warning when the battery charge is low.

Automatic Shut-Off

The inflator will automatically stop pumping when the preset target pressure is reached, preventing over-inflation.

Fast Inflation

Equipped with a 25mm large cylinder and a brushless motor. Can inflate a 195/65/R15 car tire in under 3.5 minutes.

3. Getting Started

3.1 Battery Installation

1. Ensure the inflator's power switch is in the OFF position.
2. Insert a compatible, fully charged Milwaukee M18 18V battery into the battery port on the inflator until it clicks securely into place.

3.2 Attaching the Hose and Nozzle

1. Screw the air hose firmly onto the outlet port on the inflator.
2. Select the appropriate nozzle for your valve type (e.g., Schrader valve for car tires).
3. Attach the nozzle to the end of the air hose.

4. Operation Guide

4.1 Inflating a Tire

1. Set the Target Pressure:
   • Press the Power button to turn on the display.
   • Use the Mode button to select the appropriate preset (Car, Motorcycle, etc.) or Custom mode.
   • In Custom mode, use the + and - buttons to set your desired pressure. Refer to your vehicle's manual or tire sidewall for the correct PSI.
   • Use the Unit button to select PSI, bar, kPa, or Kg/cm² if needed.
2. Connect to the Tire:
   • Remove the valve cap from the tire.
   • Firmly press the nozzle onto the tire valve stem. You may hear a brief hiss of air; ensure the connection is tight to prevent air leakage.
3. Start Inflation:
   • The display will show the current tire pressure.
   • Press and hold the Power button. The motor will start, and inflation will begin.
   • Keep the nozzle firmly pressed onto the valve during inflation.
4. Automatic Stop:
   • The inflator will automatically shut off when the target pressure is reached.
   • The display will now show the final pressure.
5. Disconnect and Finish:
   • Quickly remove the nozzle from the valve stem to minimize air loss.
   • Replace the valve cap on the tire.
   • Press the Power button to turn off the inflator's display.

4.2 Using the LED Flashlight

Press and hold the Power button for 2 seconds when the inflator is off to activate the built-in LED light. Each subsequent press and hold will cycle through: Steady Light → SOS Flashing Mode → Light Off.

5. Safety & Maintenance

5.1 Safety Warnings

• Read all instructions before use.
• Do not use to inflate large truck tires.
• Do not exceed the maximum pressure rating of 160 PSI.
• Never point the air nozzle at yourself, others, or animals.
• Do not operate the inflator continuously for more than 20 minutes. Allow it to cool down between extended uses.
• Operate in a well-ventilated area. Keep away from flammable materials.
• Check the tire valve and hose connections for leaks before and during use.
• Do not use the inflator if it is damaged or if the hose is cracked.
• Keep the battery terminals and inflator contacts clean and dry.

5.2 Care and Storage

• Store the inflator in a cool, dry place.
• Disconnect the battery when not in use for extended periods.
• Keep the air hose and nozzles clean. Wipe with a dry cloth if dirty.
• Do not store with pressure set in the memory. Turn the unit off completely.
• Periodically check the hose and connections for wear or damage.

6. Troubleshooting

7. Compliance & Disposal

This product complies with applicable standards and regulations. At the end of its life, do not dispose of this product with household waste. Please recycle the battery separately according to your local regulations for batteries and electronic equipment.