Model: 1-MR08US05 | Style: Mini Steam Iron
Overview
The BEAUTURAL Mini Travel Steam Iron is a compact, lightweight appliance designed for travel and small-scale ironing tasks. It features dual voltage compatibility, a non-stick soleplate, and a detachable water tank.
Features and Specifications
Key Features
- Compact and Lightweight: Weighs 1 pound (approx. 0.45 kg) with dimensions of 5"L x 2.76"W.
- Dual Voltage: Operates on 115V or 230V for worldwide use.
- One Temperature Technology: Single setting for all ironable fabrics, operating at 320°F (approx. 160°C).
- Steam and Dry Ironing: Switch-activated steam function with five steam outlets.
- Non-Stick Ceramic Soleplate: For smooth gliding over fabrics.
- Detachable Water Tank: Allows for easy filling and cleaning.
- Alternative Uses: Suitable for sewing, quilting, appliqué, patchwork, and other handcrafts.
Technical Specifications
| Brand | BEAUTURAL |
|---|---|
| Model Name / Number | Mini Iron / 1-MR08US05 |
| Wattage | 400 watts |
| Voltage | 230 Volts (Dual Voltage: 115V/230V) |
| Frequency | 50 Hz |
| Operating Temperature | 320°F (approx. 160°C) |
| Water Tank Capacity | Provides up to 10 minutes of continuous steam (specific volume not stated). |
| Included Components | Mini Travel Iron |
Parts and Controls
- Handle: Main grip area.
- Steam Switch: Activates the steam function.
- Non-Stick Soleplate: The heated bottom surface with five steam outlets.
- Detachable Water Tank: Located at the rear of the iron. Press the release button to remove for filling.
- Voltage Selector Switch: Located on the side or base (specific location not shown). Set to match your local power supply (115V or 230V).
- Power Cord: Connects to a standard electrical outlet.
Use Guide
Before First Use
- Remove all packaging materials.
- Ensure the voltage selector is set correctly for your country's power supply (115V or 230V).
- Fill the detachable water tank with clean, cool tap water. Do not overfill.
- Reattach the water tank securely to the iron.
General Ironing Instructions
- Plug the iron into a suitable electrical outlet.
- The iron will begin to heat. Allow approximately 60 seconds for it to reach the operating temperature (320°F).
- For dry ironing, leave the steam switch in the "OFF" position.
- For steam ironing, wait until the iron is fully heated, then slide the steam switch to the "ON" position. Tip: Activating steam before the iron is hot may cause water leakage.
- Iron garments as usual on an appropriate heat-resistant surface.
- After use, unplug the iron and allow it to cool completely before storing.
- Empty any remaining water from the tank.
Important Safety Notes:
- Always set the correct voltage before plugging in the iron.
- Do not use the iron if it has been dropped, damaged, or is leaking.
- Do not leave the iron unattended while plugged in.
- Keep the iron and cord away from hot surfaces and out of reach of children.
- The soleplate is hot during and after use. Allow it to cool fully before handling or storing.
- Use only on iron-safe fabrics. Test on an inconspicuous area first if unsure.
For Crafts and Detailed Work
The small size and precise soleplate make this iron suitable for detailed tasks:
- Sewing & Quilting: Press seams and small fabric pieces.
- Appliqué & Patchwork: Secure patches and fusible webbing.
- Other Crafts: Can be used for flower pressing or on doll clothing.
Care and Maintenance
- Cleaning the Soleplate: Wipe the cooled, non-stick soleplate with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Cleaning the Water Tank: Detach the tank and rinse with clean water. Allow to air dry completely before reattaching.
- Storage: Store the iron in a cool, dry place. Ensure the cord is loosely coiled and not wrapped tightly around the iron.
- Descaling: If used frequently with hard water, mineral deposits may form. Follow general appliance descaling instructions using a suitable solution, then rinse the tank thoroughly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron does not heat up. | Not plugged in. Incorrect voltage setting. Faulty outlet. | Check plug connection. Verify voltage selector matches local supply. Try a different outlet. |
| No steam is produced. | Water tank is empty. Steam switch activated before iron was hot. Steam switch is off. | Fill the water tank. Turn steam on only after the iron is fully heated. Check steam switch position. |
| Water leaks from the iron. | Steam was activated before the iron reached temperature. Tank is overfilled. | Always allow iron to heat fully before turning steam on. Do not overfill the water tank. |
| Soleplate is sticking or dragging. | Soleplate is dirty. Fabric is not suitable for ironing. | Clean the cooled soleplate. Check fabric care label. |