Overview
The INALSA Swiftix2000 is a 2000-watt standing garment steamer designed for vertical wrinkle removal from hanging clothes, curtains, and upholstery. It features an adjustable pole, a built-in ironing board, and a large water tank for extended use.
Features and Specifications
Key Features
- 2000W Powerful Heating System: For fast and efficient wrinkle removal.
- Variable Continuous Steam: Steam output adjustable from 18 to 32 grams per minute.
- Fast Heat-Up: Ready to use in approximately 45 seconds.
- Large 2.2L Detachable Water Tank: Transparent design for easy water level monitoring.
- Adjustable Telescopic Pole: Allows height adjustment for user comfort and different garment lengths.
- Double Pole Design: Provides enhanced stability during use.
- Built-in Ironing Board with Hanging Hook: Offers stability for garments during steaming.
- Adjustable Ironing Board: Can be set to 90° and 180° angles.
- Included Accessories: Detachable fabric brush and a protective hand glove.
- Safety Features: Includes overheat protection and a spray function.
Technical Specifications
| Specification | Detail |
|---|---|
| Wattage | 2000 Watts |
| Voltage | 230V |
| Heat-Up Time | ~45 Seconds |
| Water Tank Capacity | 2.2 Litres |
| Steam Output | 18-32 g/min |
| Product Dimensions (LxWxH) | 67 x 61 x 92 cm |
| Item Weight | 6.9 kg |
| Colour | White and Aqua Green |
Parts and Components
The following items are included in the box:
- Main unit with water tank and steam controller
- Steam hood with conduit (steam hose)
- Adjustable telescopic pole
- Ironing board
- Steam hood hanging hook
- Detachable fabric brush (accessory)
- Protective hand glove (accessory)
Setup and Assembly
- Unpack: Remove all components from the packaging.
- Assemble the Pole: Extend the telescopic pole to your desired height and ensure it is locked securely.
- Attach the Base: Connect the assembled pole to the main unit base.
- Install the Ironing Board: Attach the ironing board to the pole assembly. It can be adjusted to 90° or 180° positions as needed.
- Connect the Steam Hood: Attach the steam hood (with conduit) to the main unit's steam outlet. Ensure the connection is firm.
- Place the Hanging Hook: Attach the provided hook to the pole for hanging garments.
Note: Assemble the steamer on a flat, stable surface in a well-ventilated area.
Use Guide
Filling the Water Tank
- Ensure the steamer is unplugged from the power outlet.
- Detach the transparent water tank from the main unit.
- Fill the tank with clean, preferably distilled or demineralized water up to the maximum fill line. Do not overfill.
- Reattach the tank securely to the main unit.
Warning: Do not use chemical additives, perfumed water, or vinegar in the water tank, as this may damage the steamer.
Operating the Steamer
- Power On: Plug the steamer into a standard 230V power outlet.
- Heat Up: Turn on the power switch. The indicator light should illuminate. Wait approximately 45 seconds for the steamer to heat up and produce steam.
- Adjust Steam: Use the steam control knob to adjust the steam output to your desired level (18-32 g/min).
- Begin Steaming:
- For vertical steaming, hang the garment on the provided hook.
- Hold the steam hood close to, but not touching, the fabric.
- Move the steam hood in downward strokes, following the fabric's grain.
- Use the included fabric brush attachment to help remove lint and penetrate thicker fabrics.
- Using the Ironing Board: For smaller items or precise touch-ups, you can lay the garment flat on the built-in ironing board and use the steam hood above it.
- Spray Function: Use the spray button (if equipped) to dampen stubborn wrinkles for easier removal.
- Power Off: After use, turn off the steamer and unplug it from the wall outlet. Allow it to cool completely before storing.
Steaming Different Fabrics
- Delicate Fabrics (Silk, Wool): Use a lower steam setting and hold the hood slightly further from the fabric. Always test on an inconspicuous area first.
- Heavy Fabrics (Cotton, Linen, Curtains): Use the higher steam setting. The fabric brush can help direct steam into the fibers.
- Suits & Dresses: Steam in sections (sleeves, body, collar) for best results. Use the hanging hook for stability.
Cleaning and Maintenance
After Each Use
- Unplug the steamer and allow it to cool completely.
- Empty any remaining water from the tank.
- Wipe the exterior of the main unit, pole, and ironing board with a soft, damp cloth. Do not immerse any part in water.
- Allow the steam hood and conduit to cool, then check for any mineral deposits.
Descaling
Mineral deposits from hard water can build up and affect performance. Descale periodically:
- Fill the water tank with a mixture of 50% white vinegar and 50% water.
- Turn on the steamer and allow it to produce steam for a few minutes into a sink or bucket.
- Turn off and unplug the steamer. Let the vinegar solution sit in the tank for 1 hour.
- Empty the tank completely and rinse it several times with clean water.
- Refill with clean water and run the steamer again for a few minutes to flush out any remaining vinegar.
Note: Frequency of descaling depends on water hardness. Consult local water quality information.
Safety Instructions
Important Safety Warnings:
- Read all instructions before using the appliance.
- Use the appliance only for its intended purpose as described in this manual.
- Always plug into a grounded 230V outlet.
- Do not leave the appliance unattended while it is plugged in.
- The steam produced is very hot. Keep the steam hood away from your body, face, and other people or pets.
- Always use the protective hand glove when handling the steam hood or adjusting garments near steam.
- Do not direct steam at electrical outlets, appliances, or other electrical equipment.
- Do not use the steamer on leather, waxed fabrics, or materials that could be damaged by heat or moisture.
- Allow the appliance to cool completely before cleaning, storing, or performing any maintenance.
- Do not operate the appliance if it has a damaged cord or plug, or if it is malfunctioning or has been dropped or damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam produced | Unit not plugged in or switched on. Water tank is empty. Unit has not heated up (wait 45 sec). | Check power connection and switch. Fill water tank. Allow sufficient time to heat. |
| Weak steam output | Steam control set to low. Mineral scale buildup. Water tank not attached properly. | Adjust steam control knob. Descale the unit. Ensure tank is securely attached. |
| Water dripping from hood | Unit used before fully heating. Steam hood held at too steep an angle. | Always allow full heat-up time. Hold hood horizontally or pointed slightly downward. |
| Unusual noise or smell | First-time use (may be normal). Mineral scale or foreign object. | Run steamer for a few minutes. If persists, unplug and inspect for scale. Contact support. |
| Overheat protection activated | Unit has been running continuously for an extended period. | Turn off and unplug the steamer. Allow it to cool down completely (approx. 30 mins) before resuming use. |
Warranty and Support
The INALSA Swiftix2000 Garment Steamer comes with a 2-year warranty from the date of purchase, provided by the brand INALSA.
Contact Information
For warranty service, technical support, or product inquiries:
- Manufacturer/Packer: Tuareg Marketing Pvt. Ltd.
- Address: Khasra No- 1189, Bhalswa, New Delhi-110033, India.
- Contact Number: 9773982065
- Email: [email protected]
- Website: inalsaapliances.com
Replacement Policy (via Amazon): For defective items, physical damage, or wrong/missing items within 10 days of delivery, a replacement may be available. Contact Amazon customer service for initiation. For defects, INALSA will provide on-call support followed by a technician inspection at your location.