WEIZE YTX12 -BS Motorcycle Battery High Performance Maintenance Free Sealed BS AGM Rechargeable ATV Batteries compatible with Honda Kawasaki Suzuki

Overview

The Weize YTX12-BS is a 12-volt, sealed lead-acid (SLA) Absorbent Glass Mat (AGM) rechargeable battery designed for powersports vehicles. It is a maintenance-free battery, meaning it does not require the addition of water. This manual provides instructions for safe handling, installation, and maintenance.

Features & Specifications

Key Features

• Maintenance-Free Design: Factory activated and sealed. No need to add water.
• Spillproof and Leakproof: Can be mounted in multiple orientations (up to 90°).
• AGM Technology: Absorbent Glass Mat design provides resistance to vibration and shock.
• Valve Regulated: Includes a vent system for safety.
• Environmental Resistance: Designed for extreme freeze, heat, and vibration conditions.
• Certifications: UL, CE, and ISO 9001 certified.

Technical Specifications

• Voltage: 12 Volts (DC)
• Capacity (10hr rate): 10 Amp Hours (AH)
• Cold Cranking Amps (CCA): 180
• Chemistry: Sealed Lead Acid (SLA), Absorbent Glass Mat (AGM)
• Terminal Type: Nut & Bolt
• Terminal Polarity: Left: Positive (+) [Red], Right: Negative (-) [Black]
• Dimensions (L x W x H): 5.91" x 3.43" x 5.12" (150mm x 87mm x 130mm)
• Weight: 7.92 lbs (3.6 kg)
• Case Material: ABS Plastic
• Charge Current (Recommended): 1 Amp

Compatibility

This YTX12-BS battery is a replacement for models including 12-BS, ETX12, GTX12-BS, CYTX12-BS, and CTX12-BS. It is compatible with a wide range of powersports vehicles. Always verify the dimensions, terminal location, and CCA rating match your original equipment before purchase.

Compatible vehicle types include:

• ATVs (All-Terrain Vehicles)
• Motorcycles
• Scooters
• Personal Watercraft / Jet Skis
• Snowmobiles
• UTVs (Utility Task Vehicles)

Note: For a detailed, non-exhaustive list of compatible makes and models (e.g., Honda, Kawasaki, Suzuki, Yamaha, Polaris, Arctic Cat), please refer to the product description on the packaging or sales page.

Use & Installation Guide

Safety Precautions

• Wear protective eyewear and gloves when handling batteries.
• Keep batteries away from open flames and sparks.
• Do not short-circuit the terminals.
• Ensure the vehicle's ignition is off before beginning installation.
• Always connect the positive (+) terminal first, and disconnect the negative (-) terminal first.

Installation Steps

1. Remove the Old Battery: Disconnect the negative (-) cable first, then the positive (+) cable. Remove any mounting hardware and carefully lift the old battery out.
2. Inspect and Clean: Check the new YTX12-BS battery for any shipping damage. Clean the battery tray and cable terminals in the vehicle to ensure good contact.
3. Position the New Battery: Place the new battery into the tray, ensuring it is oriented correctly with the positive (+) terminal on the left and negative (-) on the right.
4. Secure the Battery: Use the provided screws or existing hardware to securely fasten the battery in place to prevent vibration damage.
5. Connect Terminals: Connect the positive (+) vehicle cable to the positive (+) battery terminal first and tighten securely. Then connect the negative (-) cable to the negative (-) terminal. Ensure connections are tight and corrosion-free.
6. Final Check: Double-check all connections are secure and correct. There should be no metal tools or parts touching both terminals simultaneously.

Initial Charging (If Required)

The battery is shipped pre-charged and ready for installation. If the battery has been stored for a long period or voltage is low, charge it before use.

• Use a compatible smart charger designed for 12V AGM/SLA batteries.
• Set the charger to 12V and a charge current of 1 Amp.
• Connect the charger's red clamp to the battery's positive (+) terminal and the black clamp to the negative (-) terminal.
• Follow the charger manufacturer's instructions. Do not overcharge.

General Maintenance

• This is a maintenance-free battery; do not attempt to open or add fluid.
• Keep the battery and its terminals clean and dry.
• For vehicles in seasonal storage, it is recommended to:
  • Disconnect the battery.
  • Store it in a cool, dry place.
  • Charge it fully every 3-6 months using a maintenance charger to prevent sulfation.
• Periodically check that the terminal connections are tight and free of corrosion.

Troubleshooting

• Vehicle won't start: Check battery terminal connections for tightness and corrosion. Verify battery voltage with a multimeter (should be ~12.6V+ when fully charged). The battery may need recharging.
• Battery loses charge quickly: Check the vehicle's charging system (stator/regulator). A parasitic draw from an accessory may be present. If stored, the battery may have self-discharged and require a full recharge.
• Battery appears swollen or damaged: Discontinue use immediately. Do not charge or install. Contact support for instructions.

Warranty & Support

This product is backed by a 12-month limited warranty from the date of purchase.

Important Return Information: Amazon's standard return process may not apply to this battery product. For warranty claims, troubleshooting, or returns, you must contact the seller (WEIZE) directly.

Support Contact: Use the "Contact Seller" feature through your Amazon order details or the WEIZE store page on Amazon to reach the Weize support team.