User Manual KitchenAid ART348FFFS refrigerators

Documents for KitchenAid ART348FFFS

The following documents are available:
User Manual Other Documents
  • Dimension Guide - (English) Download
  • Warranty Information - (English) Download
  • Owner's Manual - (English) Download
  • Quick Reference Manual - (English) Download

User Manual

For ART348FFFS.

90˚
F
Top Mount Refrigerator
PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
ART308FFD
Electrical: A 115-volt, 60-Hz, AC-only,
15- or 20-amp fused, grounded electrical
supply is required. It is recommended that
a separate circuit serving only your
refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not
use an extension cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending
on the model) to OFF and then disconnect
the refrigerator from the electrical source.
When you are finished, reconnect the
refrigerator to the electrical source and
reset the control (Thermostat, Refrigerator
or Freezer Control depending on the
model) to the desired setting. See “Using
the Controls.”
Water: A cold water supply with water
pressure between 30 and
120 psi (207 and 827 kPa) is required to
operate ice maker and water dispenser. If
you have questions about your water
pressure, call a licensed, qualified
plumber.
IMPORTANT: The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kPa).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration system is
connected to your cold water supply, the
water
pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10684124B
2/16
Model
Size
Reversible
Door
Depth -
With Door
“A”
Cab.
Width
“B”
Depth -
Cabinet
Only “C”
Cab.
Height
“D”
Overall
Height
“E”
Depth Door
Open 90°
“F”
18.2 cu. ft. Yes
31³⁄₈"
(79.7 cm)
29³⁄₄"
(75.6 cm)
28⁷⁄₈"
(73.3 cm)
65³⁄₈"
(166.1 cm)
65⁷⁄₈"
(167.3 cm)
59³⁄₄"
(151.8 cm)
E
overall
D
top of
cabinet
B
A
C
1
/
2" (1.25 cm)
2" (5.08 cm)
To ensure proper ventilation for your refrigerator, allow for a
1
2" (1.25 cm) space on
each and between overhead cabinets and refrigerator top. Allow at least 1" (2.5 cm)
between back of cabinet and the wall. If your refrigerator has an ice maker, make
sure you leave some extra space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2" (5 cm) minimum
on the hinge side (depending on your model) to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator near a heat source,
such as an oven or radiator.
ART318FFD
ART348FFF