Loading ...
Loading ...
Loading ...
Choose the best Detergent
Detergent
L
06 - dlocdiuqiL
40 - 90
---
---
P
Powder
o Optional
No-
Temperature range in °C
If using liquid detergent, it is not recommended to activate the delayed start. Refer to the
detergent manufacturers packaging for recommended dosage!
info: Modern washing detergents at low temperatures.
Universal
Cotton
Mix
Wool
Delicate
Express 15’
Synthetic
Softener
Special
Delicate
Colour
- - -
-
-
-
-
-
-
-
-
-
-
L
L
Leave
Before the next use,carefully check power cord,water inlet
L
L
L
O
O
O
O
O
O
L/P
L/P
L/P
L/P
L/P
L/P
Display code
noituloSesuaCedoC
Auto
Lo
HALF
FULL
HI
Automatic
Weighing the laundry load in
the drum.
load detection.
Laundry weight detection in progress, please
wait until program cycle time is displayed.
Please wait until program cycle time is
displayed: Lo = small load;HALF = half load;
FULL = optimized weight load;
HI = full load.
1:25 Remaining wash cycle time. Refer to display symbol on page 9.
19:30 Remaining delay start time Likely showing the delay start operation.
Refer to display symbol on page 9
Lock
Door cannot be opened due to
water level or hot water in the
drum.
Wait for the program to end or cancel the
program and select the Spin/Drain program.
In case there is still hot water in the drum,
to avoid scalding , select the Handwash
program and leave it to wash for several
minutes then select the Spin/Drain program.
This should allow the drum to cool down.
End End of cycle.
E1 Drainage error, water not emptied. Check drain hose for blockage and that it is
properly installed.
E2 Lock – error with door Shut the door properly.
E4 Water level not reached after 8
minutes.
Check if water supply
and water pressure
is normal.
Drain hose is self-syphoning.
E8 Water protective level - error. Auto release.Otherwise contact the
af ter sales service.
F3 Temperature sensor - error. Contact the After sales service.
F4 Heating error (Appears at the end of
a cycle .)
Contact theAfter sales service.
F7 Motor - error. Contact theAfter
sales service.
Fb Water overflow. Close tap immediately.
Contact theAfter sales service.
FA Water level sensor error. Contact theAfter sales service.
FC Electronic control - error. Contact theAfter sales service.
Unb Unbalanced load and not able to
spin.
Check and balance the laundry load in the
drum. Also reduce the load if too heavy.
Restart with a spin program.
22
23
Loading ...
Loading ...
Loading ...