Loading ...
Loading ...
Loading ...
31
has priority. It is not possible to use the hood controls
on the cooktop during this time.
▯ In networked standby mode, your appliance requires a
maximum of 2 W.
Setting up a connection
To set up the connection between the cooktop and the
hood, the cooktop must be switched on.
Connecting directly
Make sure that the hood is switched off.
For more information, refer to the section entitled
"Connecting to the cooktop" in the instruction manual for
your hood.
Note: If you connect your cooktop directly to the hood, it
cannot be connected to your home network as well and
you will not be able to use Home Connect.
1.
Turn on the cooktop.
2.
Touch and hold the KITCHEN TIMER key for
4 seconds.
The product information is displayed.
3.
Touch the KITCHEN TIMER key repeatedly until
™ and ‚‡ are displayed alternately.
‹ lights up in the cooking position display.
4.
Set the value ‚ in the settings area.
‚ flashes in the cooking position display.
5.
You have two minutes to initiate the connection
process on the hood.
6.
Once the cooktop is connected to the hood, the value
„ appears in the cooking position display. After you
exit the settings menu, the symbols for the cooktop-
based hood controls are displayed in the cooktop's
control panel.
Connecting via your home network
A router that has WPS functionality is required.
Access to your router is required. If you do not have this,
follow the steps for "Direct connection".
When you begin, make sure the hood is connected to the
app or is on your home network.
1.
Turn on the cooktop.
2.
Touch and hold the KITCHEN TIMER key for
4 seconds.
The product information is displayed.
3.
Touch the KITCHEN TIMER key repeatedly until ™ and
‚‡ are displayed alternately.
‹ (not connected) or ƒ (connected to home network)
will be lit on the cooking position display.
4.
Set the value ‚ in the settings area.
‚ flashes in the cooking position display.
5.
If the appliance is not yet connected to your home
network, press the WPS button on the router within the
next 2 minutes.
The cooktop will be connected to your home network
and the value ƒ will appear on the cooking position
display. The process of connecting to the hood starts
automatically and is active for 2minutes.
If the appliance is already connected to your home
network, proceed to the next step.
6.
Initiate the process for connecting to the hood.
7.
Once the cooktop is connected to the hood, the value
„ appears in the cooking position display. After you
exit the settings menu, the symbols for the cooktop-
based hood controls are displayed in the cooktop's
control panel.
Note: Connection can only be established when both
appliances are connected to your home network and the
connection process has been initiated for both of them. If
the connection process has already timed out for one of
the two appliances, try to connect again (basic settings,
™‚‡ setting).
Disconnecting from the Network
You can reset the connections you have saved for your
home network and hood at any time.
1.
Turn on the cooktop.
2.
Touch and hold the KITCHEN TIMER key for
4 seconds.
The product information is displayed.
3.
Touch the KITCHEN TIMER key repeatedly until
™ and ‚‡ are displayed alternately.
4.
Set the value ‹ in the settings area.
The connection has been deleted.
Controlling the hood via the cooktop
In the cooktop's basic settings, you can configure what
the hood should do when the cooktop or individual
cooking positions are switched on or off.
You can select other settings using the control panel.
Setting the fan
Activation
1.
Touch the HOOD SYNC key.
2.
Select the fan setting.
You can choose between the levels 1, 2and 3. To
select the levels Boost and PowerBoost, touch buttons
4or 5, or touch the POWER BOOST key repeatedly
until the required intensive level is set.
The fan has been activated.
Deactivating
1.
Touch the HOOD SYNC key.
2.
Select fan setting 0.
The fan has been deactivated.
Setting Automatic Mode
Activation
Touch the HOOD SYNC key until the > symbol appears
on the control panel.
The fan starts up automatically when steam is produced.
Loading ...
Loading ...
Loading ...