Owner's Manual - Page 24

For B132-002A-2. Also, The document are for others Tripp Lite models: B130-101-2, B130-101A-2, B130-101-WP-1, B130-101A-WP-2, B130-101S-2, B130-111, B130-111A, B130-101-U, B132-002-2, B132-004-2, B132-004A-2, B132-008A-2, B132-100-1, B132-100A, B132-100-WP-1, B132-100A-WP-1, B132-110, B132-110A

Loading ...
Loading ...
Loading ...
Installation continued
Non-Kit Remote Repeater Installation
*If this is a feature of your extender kit.
1. For models that support EDID copy, perform the EDID copy procedure described
in this manual prior to installation.
2. The diagram above shows a B132-004-2 installation with the maximum number
of remote units connected. B132-004A-2 and B132-008A-2 installations will be
the same, except there will be audio connections and the B132-008A-2 has 8
ports. B132-002-2 and B132-002A-2 local units come with 2 ports instead of
4, and do not feature additional ports for a local monitor and speakers.*
3. A 1024 x 768 (60 Hz) signal can be extended up to 1,000 ft. between the
local transmitter and the first remote repeater unit in the installation. Up to an
additional 1,000 ft. can be placed in between the first remote repeater unit and
the last display in the installation, for a maximum extension distance of
2,000 ft. Up to 4 remote units (3 remote repeaters and 1 receiver) can be
connected together to transmit a signal to up to 4 points in a 2,000 ft. chain.
4. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
15-08-104-933289-EN.indd 24 8/21/2015 3:45:50 PM
Loading ...
Loading ...
Loading ...