Vevor SKF-E150F - 110v Commercial Ice Maker Machine 265lbs/24h, 750w Stainless Steel Ice Machine

Instruction Manual - Page 9

For SKF-E150F.

PDF File Manual, 11 pages, Read Online | Download pdf file

SKF-E150F photo
Loading ...
Loading ...
Loading ...
“Reservation/+” button to increase the making time in minute.
B:When the machine is at the middle of ice making or standby mode,hold
the button for 2s to set the auto-turning-on or auto-turning-on time (The time
range is from 0-23 hour,in hours).
7.
A: When the machine is at the middle of ice making, press the “Light/-”
button to reduce the making time in minute.
B:Hold the button for 2s to turn off the blue light when the light is on.
Hold the button for 2s to turn on the blue light when the light is off.
8.
A: the countdown time for the ice making procedure or reservation time or
“replenishing water” or standby mode.
B: --” and standby indicator mean the machine is in standby mode.
D: 00”,”add water” and lack of water” indicator mean the machine is
replenishing water.
CLEANING & MAINTENANCE
Please thoroughly clean your ice maker before initial use.
EXTERIOR: the outside of the ice maker should be cleaned regularly with a
mild detergent and warm water. Always use a soft cloth to avoid scratching or
damaging the housing.
SPOON: clean with mild detergent and warm water in week.
Storage tank: clean with mild detergent and warm water in week.
PUMP: clean with mild detergent and warm water in week. Turn off and
unplug the machine,take the pump out,clean it with a brush then install it
back.
INTERIOR: please use the following Self-Clean function:
1. Add water and vinegar or lemon juice mix (1:1 ratio)
2. Plug in unit,press and hold the CLEAN button for approximately 6-7
seconds,then release.The unit will automatically enter Self-clean program.
This process takes about 5-6 minutes.When the Self-Clean program is
finished,unit will automatically power off.
3. The fan blade will be rotating.This process rinses the inside parts several times.
4. After the Self-Clean program is completed,unplug the power cord and drain
out the water by unplugging the drain cap on the side.Replace drain cap.
5. Add fresh water to the water reservoir,up to the water level mark.
6. Plug the unit and repeat the Self-Clean process by repeating steps 3 to 5. This
will rinse out the vinegar/lemon residue.
Loading ...
Loading ...