Loading page 1...
Loading page 2...
Loading page 3...
Loading page 4...
Loading page 5...
Loading page 6...
HEAT LIVE RELAX
Position the bracket on the wall in the desired position & drill holes for four mounting screws. Once the holes are
drilled, use four screws (appropriate for the type of wall) to fix the bracket firmly in place. Check for strength.
Carefully place the heater (slightly tilted forward) onto the hooks at the bottom of the bracket & rotate back so the
clips fix back into their original holes. Check that they are fixed correctly. If possible, have a second person help to
check for alignment as the heater is attached. The heater is now ready to connect to the mains power.
SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the heater will automatically shut off. It can only resume operation
when the user resets the unit (see reset instructions below).
To reset your heater:
1. Unplug the heater and wait for 45 minutes for the unit to cool down.
2. Then, turn on the unit again and operate normally.
CLEANING & MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE HEATER IN WATER!
With the heater disconnected from the power, clean the exterior body of the heater with a soft damp cloth.
Always make sure that the heater is completely dry before connecting back to the mains supply. A vacuum
cleaner can be used to clean the inlets & outlets of dust & fluff. To clean behind a wall mounted unit, the
mounting clips can be disconnected & the heater rotated slightly forward (a 2 person job). Please make sure the
unit is properly resecured after.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the heater. NEVER
use ALCOHOL OR SOLVENTS.
STORAGE: Store the heater with these instructions in the original packaging, in a cool, dry place.
WEEE WARNING
This product should not be disposed of with household waste. Please recycle where facilities exist and
check with your local authority for recycling advice.
SPECIFICATIONS
MODEL INPUT POWER RATED POWER DIMENSIONS (NO CASTORS)
WEIGHT
HPE151W 220-240Vac 50Hz
1500W 640x400x85mm (WxHxD) 5.1Kg
HPE221W 220-240Vac 50Hz
2200W 940x400x85mm (WxHxD) 7.2Kg
Loading page 8...