Loading page 1...
Loading page 2...
Loading page 3...
Loading page 4...
Loading page 5...
Loading page 6...
Loading page 7...
Loading page 8...
Loading page 9...
Loading page 10...
Loading page 11...
i¸ ][/i ?:? : :: :/
Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER ON/OFF @ and CLEAN _ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven
control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for
more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
iNSTRUCTIONS PRESS DISPLAY
To set the control for Continuous Bake or 12 Hour
Energy Saving features:
1. Press and hold @ for 6 seconds or until the control beeps
once. (Fig.l). "12h" or "== h" will appear in the display and the
control will beep once.
2. Press _.._ to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (See Fig. 2) in the
display indicates the control is set for 12 Hour Energy Saving
feature and % =h" (See Fig. 3) indicates the control is set for
the Continuous Bake feature.
3. Press q to accept the change (See Fig. 4) display will return
to time of day or press @ to reject the change.
for 6 seconds
or@
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Setting Kitchen Timer
The TIMER ON/OFF @ pad controls the kitchen timer feature. The Timer serves as an extra reminder in the kitchen that
will beep when the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be
used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 10 for
time amount settings.
INSTRUCTIONS PRESS DISPLAY
To set the Timer (example for 5 minutes):
1. Press @. (See Fig. 5).
®
,
,
Press the number pads to set the desired time in the display
(example __.__). Press_ . The timer will begin a count down.
(See Fig. 6).
Note: If t is not pressed the timer will return to the time of
day.
When the set time has run out, the clock will sound with 3 long
beeps every 5 seconds until @ is pressed (See Fig. 7).
To cancel the Timer before the set time has run out:
Press @. The display will return to the time of day.
Fig. 5
Fig. 6
®
Fig. 7
12
Loading page 13...
Loading page 14...
Loading page 15...
Loading page 16...
Loading page 17...
Loading page 18...
Loading page 19...
Loading page 20...
Loading page 21...
Loading page 22...
Loading page 23...
Loading page 24...
Loading page 25...
Loading page 26...
Loading page 27...
Loading page 28...
Loading page 29...
Loading page 30...
Loading page 31...
Loading page 32...