Loading page 1...
Loading page 2...
Loading page 3...
Loading page 4...
Loading page 5...
Loading page 6...
Loading page 7...
Loading page 8...
Loading page 9...
Loading page 10...
Loading page 11...
Loading page 12...
Loading page 13...
Loading page 14...
Loading page 15...
Loading page 16...
Loading page 17...
Loading page 18...
Loading page 19...
Loading page 20...
Loading page 21...
Loading page 22...
Loading page 23...
Loading page 24...
Loading page 25...
Loading page 26...
Loading page 27...
Loading page 28...
Loading page 29...
Loading page 30...
Loading page 31...
Loading page 32...
Loading page 33...
Loading page 34...
Loading page 35...
Loading page 36...
Loading page 37...
Loading page 38...
Loading page 39...
Loading page 40...
Loading page 41...
Loading page 42...
Loading page 43...
Loading page 44...
Loading page 45...
Loading page 46...
Loading page 47...
Loading page 48...
Loading page 49...
Loading page 50...
Loading page 51...
Loading page 52...
Loading page 53...
Loading page 54...
Loading page 55...
Loading page 56...
Loading page 57...
Loading page 58...
Loading page 59...
Loading page 60...
Loading page 61...
Loading page 62...
Loading page 63...
Loading page 64...
Loading page 65...
Loading page 66...
Loading page 67...
Loading page 68...
Loading page 69...
Loading page 70...

troubleshooting _71
tRouBLeSHootiNG
troubleshooting
tRouBLeSHootiNG
Samsung works hard to ensure that you don’t have problems with your new gas range.
If you experience a problem, look first for a solution in the table below. If, after trying the
suggested solution, you’re still having trouble, call Samsung at 1-800-SAMSUNG (1-
800-726-7864).
PROBLEM POSSIBLE CAUSE SOLUTION
you smell gas. There is a gas leak.
The surface burner knob is not in
the ‘o’ position, yet the burner
itself is not ignited.
Clear the room, building, or area
of all occupants.
Immediately call your gas
supplier from a neighbor’s
phone. Do not call from your
phone. It is electrical and
could cause a spark that could
ignite the gas. Follow the gas
supplier’s instructions.
If you cannot reach your gas
supplier, call the fire department.
the range is not level. The appliance has been installed
improperly.
The leveling leg(s) is (are)
damaged or uneven.
Make sure the floor is level,
strong, and stable. If the floor
sags or slopes, contact a
carpenter.
Check and level the range. (See
the Installation Instructions.)
The kitchen cabinets are not
properly aligned and make the
range appear to be not level.
Ensure that cabinets are square
and provide sucient room for
installation.
the oven control beeps
and displays an error
code.
You have a function error code.
See the “Troubleshooting and
information codes” chart on
page 76.
Press the CLEAR/OFF pad and
restart the oven. If the problem
persists, disconnect all power to
the range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
All burners do not light. The power cord is not plugged
into the electrical outlet.
Make sure the electrical plug
is plugged into a live, properly
grounded outlet.
A fuse in your home may be
blown or the circuit breaker
tripped.
Replace the fuse or reset the
circuit breaker.
The gas supply is not properly
connected or turned on.
See the Installation Instructions
that came with your range.
(IB)FX710BGS,FX510BGS,NX583G0VB_DG68-00356A-05_EN_120706.indd 71 06/08/2012 13:44:06
Loading page 72...
Loading page 73...
Loading page 74...
Loading page 75...
Loading page 76...
Loading page 77...
Loading page 78...
Loading page 79...
Loading page 80...