Loading ...
Loading ...
Loading ...
9
Installation
Electrical connection
• Your washing machine is set to 220-240V ~ 50Hz.
• The mains cord of your washing machine is equipped with a specific
earthed plug. This plug should always be inserted to a earthed socket of 13
amps. The current value of the fuse should be 13 amps.
• We do not take responsibility for any damage that occurs due to non
earthed usage.
• If you do not have a suitable socket and fuse conforming with this, please
ensure the work is carried out by a qualified electrician.
• Operating your machine under low voltage will cause the life cycle of
your machine to be reduced and its performance to be restricted.
Water inlet hose connection
• Your Washing Machine must only be connected to your water supply
using the supplied new fill hose. Old hoses must not be reused.
• Be careful not to confuse hot water inlet and cold water inlet.
• Your machine has a single water (cold) inlet and should only be
connected to the cold water inlet
• To prevent leakages on the connection joints, 1 seal is included in the hose
packing, (Fit this seal on the end of the water inlet hose at the tap side).
• After all connections are completed, check for leakages around the
connection joints by turning on your tap completely and seeing if any
water escapes.
• Be sure that the water inlet hoses are not folded, twisted, crushed or
elongated by stretching.
• Your Washing Machine must only be connected to your water supply
Loading ...
Loading ...
Loading ...