Loading ...
Loading ...
Loading ...
33
Maintenance
Cleaning the water inlet filter
Water inlet filters prevent dirt and foreign substances in the water from
entering the machine. These are on the tap and on the ends of water valves
along the water inlet hose of your machine. We recommend that these filters
are cleaned every 2 months or when your machine cannot take sufficient
amounts of water despite the tap being open.
To do this follow the below steps: these filters should be cleaned.
1. Turn off the water supply
2. Unscrew the water inlet hose(s) from the Washing Machine.
3. To remove the water inlet filter from the water inlet valve, use a pair of long-
nosed pliers to gently pull on the plastic bar in the filter.
4. A second water inlet filter is located in the tap end of the water inlet hose. To
remove the second water inlet filter, use a pair of long-nosed pliers to gently
pull on the plastic bar in the filter.
5. Clean the filter thoroughly with a soft brush and wash with soapy water and
rinse thoroughly. Re-insert the filter by gently pushing it back into place.
Note: The filters at the water inlet valve may become clogged due to water
quality or lack of required maintenance and may break down. This may cause a
water leak. Any such breakdowns are out of the scope of the guarantee.
Loading ...
Loading ...
Loading ...