Loading ...
Loading ...
Loading ...
29
Trouble shooting
Fault Possible cause Removing methods
Excess foam has formed in
the detergent draw.
Excessive amount of
detergent used.
Press the Start/pause button.
To eliminate foam formation,
mix a tablespoon of softener
with 500ml of water and
pour the mixture in the
detergent drawer. After 5 -
10 minutes, press the
Start/pause button again. For
the next washing operation,
use the correct amount of
detergent.
Wrong detergent used.
Use detergents produced
only for automatic washing
machines.
Your appliance vibrates.
The feet of your machine have
not been adjusted correctly.
Adjust the feet on your
machine.
Transportation screws have not
been removed.
Remove transportation
screws.
Your machine is under
-
loaded
with laundry or laundry settled
unevenly.
This will not stop the
operation of your machine.
Your machine is overloaded
with laundry or laundry settled
unevenly.
Do not overload the
appliance more than the
amount recommended and
settle the laundry in the
machine evenly.
Your machine rests on a hard
surface.
Prevent your machine from
resting on hard surfaces.
(sides and rear)
No water appears in the
drum during washing.
No fault. Water is in the
unseen part of the drum.
-
Loading ...
Loading ...
Loading ...