Loading ...
Loading ...
Loading ...
4
Before Installing
Read this installation manual completely
before installing the rooftop air
conditioner.
The following tips and instructions must
be observed while installing the rooftop
air conditioner.
What’s in the Box
Open the box and remove the
components from carton. Make sure
you have all the following items included
in the packaging, if any item is missing,
contact your dealer.
Rooftop Air Conditioner:
Rooftop Unit
Lower Duct
Divider
Upper Duct
Divider
Mounting Frame
Filter
Decoration Plate
ADB Shroud
Control Box
Bolt
PE Foam
Rooftop unit x 1
Warranty Leaflet x 1
Air Distributor Box (sold separately):
Rooftop Unit
Lower Duct
Divider
Upper Duct
Divider
Mounting Frame
Filter
Decoration Plate
ADB Shroud
Control Box
Bolt
PE Foam
Upper Duct Divider x 1
Lower Duct Divider x 1
Bolt x 4
Mounting Frame x 1
Control Box (sold separately) x 1
Air Distribution Box (ADB) Shroud x 1
Filter x 2
Decoration Plate x 1
Self-tapping Screws x 6
PE foam x 1
Instruction Manual x 1
Choosing Proper Location
for the Air Conditioner
IMPORTANT: The roof must be
designed to support the weight of the
rooftop unit and the weight of 2 installers
standing on the roof.
There are two ways of installing the
rooftop air conditioner:
Using the existing roof vent opening in
the vehicle roof.
Making a new opening. In this case
the opening should be reinforced by
an appropriate frame as required.
Existing Roof Vent Opening
The air conditioner is designed to fit over
an existing 14” roof vent opening.
New Opening
When no roof vent is available or another
location is desired, the following is
recommended:
For one unit installation - the air
conditioner should be mounted
slightly forward of center (front to
back) and centered from side to side.
For two unit installations, install one
air conditioner one third from the front
of the RV and the other air conditioner
two thirds from the front of the RV,
aligned in the center.
Loading ...
Loading ...
Loading ...