Loading page 1...
Horizontal Bottle Coolers
1
INSTALLATION / OPERATION
IMPORTANT! PLEASE READ BEFORE INSTALLATION
■ If the unit has recently been transported, please let unit stand still for a
minimum of 24 hours before plugging it in.
■ Make sure that the unit drops down to the desired temperature before
loading the unit with product.
■ Make sure that there is proper ventilation around the unit in the area where
it will operate.
■ Make sure all accessories are installed (i.e. shelves, shelf clips, casters)
before plugging the unit in.
■ Please read through the Operation / Owner’s Manual in its entirety before
installation.
CABINET LOCATION GUIDELINES
■ Install the unit on strong and leveled surfaces.
· Unit may make noises if the surface is uneven.
· Unit may malfunction if the surface is uneven.
■ Install the unit in an indoor, well-ventilated area.
· Unit performs more efficiently in a well-ventilated area.
· For best performance, please maintain clearance of 4” on the back of
the unit.
· Outdoor use may cause decreased efficiency and damage to the unit.
■ Avoid installation in a high humidity and/or dusty area.
· Humidity could cause unit to rust and decrease efficiency of the unit.
· Dust collected on condenser coil will cause unit to malfunction. Clean
the condenser at least once a month with a brush or a clean cloth.
Loading page 3...
Loading page 4...
Loading page 5...
Loading page 6...
Loading page 7...
Loading page 8...
Loading page 9...
Loading page 10...
Loading page 11...
Loading page 12...
Loading page 13...
Loading page 14...
Loading page 15...
Loading page 16...
Loading page 17...
Loading page 18...
Loading page 19...