Loading ...
Loading ...
Loading ...
If your refrigerator has an automatic ice maker, it will provide a
sufficient supply of ice for normal use. During the initial startup
of your refrigerator, no ice will be produced during the first 24
hours of operation. Air in new plumbing lines may cause the
ice maker to cycle two or three times before making a full tray
of ice. With no usage, it will take approximately one to two days
to fill the ice container.
New plumbing connections may cause the first production of
ice cubes to be discolored or have an odd flavor. Discard ice
made during the first 24 hours.
TURNINGYOUR iCE MAKER ON
ICE PRODUCTION:WHATTO EXPECT
The ice maker will produce 2.5 to 3 pounds of ice every 24
hours depending on usage conditions. Ice is produced at a
rate of 8 cubes every 80 to 160 minutes.
After the plumbing connections have been completed, the
water supply valve must be opened. Place the ice container
under the ice maker, pushing it as far back as possible. Lower
the wire signal arm to its "down" or ON position.
TURNINGYOUR ICE MAKER OFF
To stop the ice maker, lift the
wire signal arm until it clicks and
locks in the "up" or OFF position.
The ice maker also turns off
automatically when the ice
container is full. If your model
has an adjustable freezer shelf,
place the shelf in the lower
position, so that the wire signal
arm will hit the ice when the
container is full.
Wire S
Signal Arm
Loading ...
Loading ...
Loading ...