Miele PWM 908 [EL DP] Operating and Installation Instructions

Loading ...

Supervisor level

100

Only cold water is used for the main

wash.

- Hot

Hot water is also added for the main

wash.

Hot water can only be added if the

wash temperature is above 86°F

(30°C).

Program cycle times will be longer if the

machine is not connected for hot water;

this may mean that the “Time left” dis-

play is incorrect.

First rinse

You can select the water type for the

first rinse in some programs.

- Cold (factory default)

Only cold water is used for the first

rinse.

- Hot

Hot water is also added for the first

rinse.

Final rinse

You can select the water type for the

last rinse in some programs.

- Cold (factory default)

Only cold water is used for the final

rinse.

- Hot

Hot water is also added for the final

rinse (only possible for programs with

a temperature of at least 140°F/

60°C).

Low water pressure

If the water pressure is below 100kPa

(1bar), the program will be canceled

and the fault messageCheck water in-

take will appear.

If the on-site water pressure cannot be

increased, activating the settingLow wa-

ter pressure will prevent the program

from being canceled.

Factory default: No

CapDosing

You can choose whether CapDosing is

displayed in the program settings.

Factory default: On

Loading ...

Miele PWM 908 [EL DP] Professional Washing Machine

Operating and Installation Instructions - Page 100